https://www.scopus.com/authid/detail.uri?authorId=8693032700

Prof. walid M. daoush

Professor of Materials Science and Nancomposites

Helwan University, Cairo; Egypt

Present Address;College of Science
Al Imam Mohammad Ibn Saud Islamic University,

P.O.Box: 90950, Riyadh 11623, Saudi Arabia

Phone office: (00966) 0112595794
Phone (Cell): (00966) 0566724635

Email:[email protected]

Email: [email protected]

https://www.helwan.edu.eg/english/?page_id=1145

https://units.imamu.edu.sa/colleges/science/Admission/Pages/default.aspx

ResearchGate:https://www.researchgate.net/profile/Walid_Mohamed_Daoush

Scopus ID: https://www.scopus.com/authid/detail.url?authorId=35609965600

Google Scholar: https://scholar.google.com/citations?hl=en&user=KXw-s0AAAAAJ

LinkedIn: https://www.linkedin.com/in/walid-daoush-32150248/

CITIZENSHIP: Egypt

Gender:Male

Date of Birth:Jun-9-1973

Martial State: Married

RESEARCH INTERESTS

• Materials Science
• Metallurgy
• Nanomaterials.
• Carbon Nanotubes.
• Metal Powder Fabrications and consolidations.
• Composites (metal, ceramic, polymer matrix and lamellar composites).
• Biomaterials.
• Porous Materials
• Microstructure-physical, magnetic and mechanical properties relations in materials.

EMPLOYMENT

• ·September 2016-to date: Professor

                                              (College of Science)
Al Imam Mohammad Ibn Saud Islamic University,

                                      Riyadh; KSA

• ·Dec 2015- to August 2016: Professor (Department Head May 2012-date)

                                 Department of Production Technology,

                                 Faculty of Industrial Education

Helwan University, Cairo; Egypt

• ·Jun 2015- to Nov.2015:AssociateProfessor (Department Head)

                                 Department of Production Technology,

                                 Faculty of Industrial Education

Helwan University, Cairo; Egypt

• ·Aug.  2014- to May 2015: Visiting Associate Professor (Fulbright Scholar)

                                  Department of Mechanical Engineering,

                                  San Diego State University (SDSU)

                                  San Diego, California, USA.

• ·April 2012- 2015: AssociateProfessor (Department Head May 2012-August 2015)

                                 Department of Production Technology,

                                 Faculty of Industrial Education

Helwan University, Cairo; Egypt

• ·April. 2011-2012: Post-Doctoral Fellow

                               Graduate Institute of Applied Science and Technology

National Taiwan University of Science and Technology (NTUST)

Dec.   2009- 2011:     Research Associate Professor (Lab. Director - Oct. 2010)

                                  Powder Technology Division,

Central Metallurgical R&D Institute (CMRDI), Cairo, Egypt

Dec.   2008- 2009:     Researcher

                                  Powder Technology Division,

Central Metallurgical R&D Institute (CMRDI), Cairo, Egypt.

Dec 2007- 2008:      Research Assistant Professor     

          Department of Materials Science and Engineering,

          Korea Advanced Institute of Science and Technology (KAIST),

Daejon; South Korea.

Jan 2007- Nov.2008: Research Assistant Professor     

           Department of Materials Science and Engineering,

           Korea Advanced Institute of Science and Technology (KAIST),

Daejon; South Korea.

Dec.   2004- 2006:  Researcher

                               Powder Technology Division,

Central Metallurgical R&D Institute (CMRDI), Cairo, Egypt.

Jan   2001- 2004:   Assistant Lecaturer

                               Powder Technology Division,

Central Metallurgical R&D Institute (CMRDI), Cairo, Egypt.

July   1996- 2000:  Research Assistant

                               Powder Technology Division,

Central Metallurgical R&D Institute (CMRDI), Cairo, Egypt.

education

• ·D. Phil (2004), Faculty of Science, University of Ain Shams, Cairo; Egypt.

                 Thesis Title: Ni-Coated Powder Approach for Advanced Materials

• · Master of Science (2001)

Thesis Title: Preparation of Copper Base Friction Materials byChemical Reduction Method

• · Bachelor of Science (1994)

                            Class of Degree: First Class Honors.

TRAINING

• “Fine Ceramics Application” atJapan Fine Ceramics Center in the period from 9/5 to 21/7/2000.
• “Processing and Investigations of New Composite Materials” at the Institute of material Research of Slovak Academy of Science in the period 1/3 to 28/4/2004.
• “Design & Optimization of Laminated Composite Materials”, 8-9 May 2007 in Kavaq Business Intelligence Co., Kuala Lumpur, Malaysia.

Languages and Computer Skills

• English (Speaking and Writing)         
• Japanese (Short Speaking)     
• Korean (Short Speaking, Writing)                 
• Mother language Arabic        
• ICDL

AWARDS & HONORS

1-      Awarded the Price ofthe Egyptian Academy of Science and Technology (Prof. Venice Gouda)for Young researcher2010in advanced materials.

2-      Selected candidate in the Who's Who in the World at 2011https://www.marquiswhoswho.com/

TEACHING EXPERIENCE

Teaching career span three institutions as follows;

1-      Central Metallurgical R&D Institute

2-      University of Helwan in Cairo; Egypt.

3-      College of Science at Al Imam Muhammad Ibn Saud Islamic University in Riyadh; KSA.

The teaching experience included the followings;

Undergraduate Level

• Introduction to Technology (an Introduction to Extractive Metallurgy).
• Solid State and Materials science
• Materials Properties and Testing.
• Metal Welding.
• MaterialsJoining.
• Metals Forming.
• Electrochemistry and Corrosion
• Physical Chemistry (Phase Diagrams, Thermodynamics and Kinetics)
• Nuclear and Radiation Chemistry
• Introduction to Chemical Engineering
• Industrial Chemistry
• Materials Science and Technology.
• Work Study.
• Safety in Industry.
• Tool and Die Design.
• Quality Control.
• Finishing Processes and Non-Traditional Machining.
• Planning and Managements in the Industry.

Graduate Level

• Powder Technology and sintering (Trainingof Engineering).
• Work Study.
• Materials Technology( Nanotechnology)
• Metal Forming Processes
• Welding Technology

Undergraduate research projects:

-       More than 50 graduated Projects in the field of materials science and testing at Helwan University, Cairo; Egypt and at the college of science in the Al Imam Muhammad Ibn Saud Islamic University, Riyadh; KSA.

Thesis Supervision:

-       Dr. Daoush has so far collaborated and co supervised for 15 PhD and Master’s Candidates.

Graduated and defendedPh.D. Thesis

1-      “Study of Some co-Precipitated Peroveskite-Manganite Alloys” by EidK. Abdel-Khalek, Faculty of Science at Al Azhar University, Cairo Egypt (2006).

2-      “Fabrication and Characterizations of silicon carbide reinforced aluminum matrix nanocomposites”by Mohamed Hashish, Faculty of Engineering at Zagazig University, Zagazig Egypt (2013).

3-      “Processing and development of New Tungsten Heavy Alloys Products” by Mohamed A. Sayed, Faculty of Engineering at Helwan University, Cairo, Egypt(2015).

4-      “ Preparation of (Ta,Nb)C/Ni Cermets Suitable for Cutting Tools” by Hossam. M. Yehia, Faculty of Industrial Education at Suez University, Suez, Egypt (2016).

Graduated and defendedMSc. Thesis

1-      “Synthesis and Properties of Iron-Base Compositethrough Powder Metallurgy”by El Sayed K. Maree Khalil, Faculty of Engineering at Al Azhar University (2015).

2-      “Processing and Characterization of Boron Nitride/Nickel Copper Matrix Composite as Cutting Tool Materials” by Ahmed A. El Tantawy, Faculty of Industrial Education at Suez University, Suez, Egypt (2016).

3-      “Fabrication and Characterization of Fabrication and Characterization of Copper/Silicon Nitride Composites” by Mahmoud A. Ahmed, Faculty of Industrial Education at Suez University, Suez, Egypt (2016).

4-       “Preparation and Heat Flow Investigations of copper matrix composites as Electronic Component coolants”by Ahmed H. Swedan, Faculty of Industrial Education at Suez University, Suez, Egypt (2016).

DEVELOPMENT OF POWDER TECHNOLOGY LABORATORY (CMRDI)

The facilities include powder Fabrication facilities, water atomization, cold compaction, bench and industrial scale vacuum and N/H gas sintering furnaces. Mechanical alloying apparatus, powder rotator mixer, high accuracy digital balance, powder presses and dies, abrasive cutter, sieve analysis/shaker capabilities, high-temperature tube furnace, and microscopes with image analysis facility, materials polishing, grinding and specimen mounting capabilities facilities among others.

PROFESSIONAL SERVICES & COMMITTEES

      Membership

-       Member (reviewer) in the committee of the metallurgy, petroleum and mining at the Supreme Council of Universities-Egypt (2016-2019).

-       Member In the International Technical Committees of the international Conference on Advanced Materials, Technology and Application in Bali Island, Indonesia, 2018.

-       Editor of the international journal of Materials Sciences and Applications 2017.

-       Editor of the SciFed Materials Research Letters 2017.

-       Member of the Organized Committee of the 2017 International Conference on Structural Materials and Civil Engineering ( ICSMCE 2017)Bangkok, Thailand

-       Member of the Organized Committee of the 2017 International Conference on Mechanics of Composite Materials (ICMCM 2017)Bangkok, Thailand. 

-       Lead Guest Editor of the special issue in metallic nanoparticles of the journal of nanotechnology 2017.

-       Associate Editor of the journal of Materials Sciences and Applications 2016.

-       Associate Editor of the journal of Nanomedicine Research 2016.

-       Fulbright Alumni 2014-2015 at San Diego State University, California, USA.

-       Member in the Materials Research Society since 2010.

-       Member in the American Nano Society since 2010.

-       Member in the Chemical Engineering Division of the American Chemical Society since 2010.

-       Member in the FP7 European commission experts 2009.

-       Member at Korea Research Foundation 2008

-       Member in the International Nanoscience Community since 2007.

-       Member in the Egyptian Syndicate of Scientific Professions since 1994.

Journal Reviewer for:

• Journal of Alloys and Compounds
• Journal of Materials and Design
• Journal of Super lattices and Microstructures.
• Journal of Materials Research.
• Journal of Nanoparticles Research.
• Journal of Thin Solid Films.
• Scientific Research and Essays (SRE).
• Journal of Physical Chemistry.
• Journal of Powder Metallurgy.
• Journal of Nano Technology.
• Journal of Nano Technology
• Engineering Science and Technology
• Advanced Powder Technology

Book Reviewer:

• Book Reviewer for “Materials: Introduction and Applications” by Prof. WitoldBrostow and Prof. Haley E. HaggLobland, Published by Wiley (2017).

• Book Reviewer for “Cellulose Nanocrystals: Properties, Production and Applications” by Prof. Wadood Y. Hamad, Published by Wiley (2017)

• Book Reviewer for “MaterialsProcessing: A Unified Approach to Processing of Metals, Ceramics and Polymers” by Prof. Lorraine F. Francis, Published by Academic Press Publications (2016).

• Book Reviewer for "Nanostructured Carbon Materials for Catalysis” by Prof. Philippe Serp and Bruno Machado, published by Royal Society of Chemistry (2015).

• Book Reviewer for "NanostructuralBioceramics: Advances in Chemically Bonded Ceramics" by Prof. Leif Hermansson, published by Taylor and Francis (2015).

• Book Reviewer for "Bionanomaterials for Dental Applications" by Prof. MieczyslawJurczyk, published by Taylor and Francis (2014).

• Book Reviewer for "Nanoscience and Nanotechnology in Engineering” by Prof. Vijay K. Varadan, A. SivathanuPillai, DebashishMukherji, MayankDwivedi and Linfeng Chen, published by World Scientific (2010).

PUBLICATIONS

v  PATENTS

1-Licensed:Method for manufacturing high hardness coating powder with good high temperature stability and improved surface characteristics and strength: KR 1492969 (priority date: Feb. 16, 2015) inventors Park, HuiSeop; Ryu, Min Ho; DAOUSH, WALID M.; HONG, SUN HYEONG. Patent Assignee Name: ILJIN DIAMOND CO LTD.

2-Licensed:Coating powder used for cutting tool, is obtained by maintaining furnace containing coating material of titanium and solution of primary and secondary salt, at predetermined temperature such that molten salt reaction is carried out: WO2010056077-A2 ; KR2010054511-A ; WO2010056077-A3 ; WO2010056077-A9 ; KR1492969-B1(priority date: Nov. 14, 2008)inventors:DAOUSH W M, HONG S H, PARK H S, RYOO M H, HONG S, PARK H, RYU M, WALRIDEU EM. D. Patent Assignee Name: ILJIN DIAMOND CO LTD.

https://www.google.com.tr/patents/WO2010056077A9?cl=en&hl=tr

v  HANDBOOK

“Nickel Coated Powder Approach for Advanced Materials” Edited by Walid M. Daoush, Sayed F. Moustafa and Sayed T. AbdElreheem, published by Lambert Academic Publisher.

https://www.lap-publishing.com/catalog/details//store/gb/book/978-3-659-90142-3/nickel-coated-powder-approach-for-advanced-materials

v  BOOK CHAPTER

Chapter on Improvement of the Reinforcements Distribution in the Composite Matrices Using Powder Coating Process “in Handbook of High Performance Coatings for Automotive and Aerospace Industries, edited by  Abdel Salam HamdyMakhlouf, published by  Nova Science Publisher, authors: Walid M. Daoush, Byung K. Lim, Hee S. Park, Sayed F. Moustafa, and Soon H. Hong, pp.301-324. https://www.novapublishers.com/catalog/product_info.php?products_id=11740.

3-      REFEREED JOURNAL PUBLICATIONS(students names underlined)

 Dr. Daoush’s publications have been so far cited more than 515 times, with an h-index of 11  (According to Google scholar Citation).

45-Mohamed A. Sayed, Osama M. Dawood, Ayman H. ELSayed, Walid M. Daoush, “Application of Taguchi Method in Optimization of Process Parameters of ODS WHAs” Advances in Materials Research, Vol. 6(1) 79-91(2017).

44- Walid M. Daoush”Co-Precipitation and Magnetic Properties of Magnetite Nanoparticles for Potential Biomedical Applications”, Journal of Nanomedicine Research, Vol. 5(3) 118-123 (2017).

43.WalidM.Daoush, J. Yao, M. Shamma, K.Morsi “Ultra-rapid Processing of High-hardness Tungsten-Copper Nanocomposites”,ScriptaMaterialia, Vol. 113, 246-249 (2016).

42.WalidM.Daoush, AymanElsayed, Omayma El Kady, Mohamed Sayed, OsamaM. Dawood“Enhancement of Physical and Mechanical Properties of Oxide Dispersion Strengthened Tungsten Heavy Alloys”, Metallurgical and Materials Transactions A, Vol.47, Issue 5, 2387-2395(2016).

41.WalidDaoush, Ahmed Swidan, GamalAbd El-Aziz, Mohamed Abdelhalim “Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat SinkComposites”, Materials Sciences and Applications, Vol 7, 542-561 (2016).

40.Mahmoud A. Ahmed, Walid M. Daoush, Ahmed E. El-Nikhaily” Fabrication and characterization of Copper/Silicon Nitride composites”, Advances in Materials Research, Vol. 5, No. 3, 131-140 (2016).

39. K. Morsi,Walid M. Daoush “Al-TiH₂ Composite ‘Particles’ as foaming Precursors for Metallic Foams”, ScriptaMaterialia, Vol. 105, 6-9 (2015).

38.H. M. Yehia, Walid. M. Daoush, A. E. El-Nikhaily”Microstructure and Physical Properties of Blended and Coated (Ta, Nb)C/Ni Cermets”, Powder Metallurgy Progress Vol.15, No.2, 262-271(2015).

37.Walid M. Daoush, Omayma A. El Kady ,Amal. A. AbdElgany, Mohamed A. Ghanem , Ahmed E. El-Nikhaily “ Microstructure, Hardness and Magnetic Properties of (W:Ti)C-Ni Cemented Carbides” Journal of Japan Ceramic Society, in Press (2015).

36. AymanElsayed, Wei Li, Omayma A. El Kady, Walid M. Daoush, Eugene A. Olevsky, Randall M. German“Experimental Investigations on the Synthesis of W-Cu Nanocomposite through Spark Plasma Sintering”, Journal of Alloys and Compounds, Vol. 639, 373-380 (2015).

35.Walid M. Daoush, Hee S. Park, FawadInam, Byung K. Lim, and Soon H. Hong “Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering”, Metallurgical And Materials Transactions A, Vol. 46A, No. 3, 1385-1393 (2015).

34.Walid  M. Daoush, ToyokoImae “ Fabrication of PtNi Bimetallic Nanoparticles Supported on Multi-Walled Carbon Nanotubes", Journal of Experimental Nanoscience, Vol. 10, No. 5,392–406 (2015).

33.Walid M. Daoush, A. Francis, Y. Lin, R. German “An exploratory investigation on the in-situ synthesis of SiC/AlN/Al composites by spark plasma sintering”, Journal of Alloys and Compounds,Vol. 622, 458-462 (2015).

32.Walid M. Daoush, OmaymaElkady "Microstructure, Physical Properties and Hardness of Al₂O₃ Short Fibres/Ni Matrix Composites Fabricated by Powder Technology", Journal of Composite Materials, Vol. 48, No. 30, 3735-3746 (2014).

31. Walid M. Daoush, Hee S. Park, Soon H. Hong “Fabrication of TiN/cBN and TiC/Diamond coated particles by titanium deposition process”, Trans. Nonferrous Met. Soc. China, Vol. 24, 3562−3570 (2014).

30. Walid M. Daoush, Byung K. Lim, Dong H. Nam and Soon H. Hong "Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering" Journal of Experimental Nanoscience, Vol. 9, No. 6, 588-596 (2014).

29.FawadInam, Badekai R Bhat, Thuc Vo, Walid M. Daoush "Structural health monitoring capabilities in ceramic - carbon nanocomposites" Ceramic International , Vol.40, No.2, 3793-3798 (2014).

28. Walid M. Daoush, Soon H. Hong "Synthesis of multi-walled carbon nanotube/silver nanocomposite powders by chemical reduction in aqueous solution", Journal of Experimental Nanoscience, Vol. 8, No. 5, 578–587 (2013).

27.Zeinab Abdel Hamid, Sayed F. Moustafa, Walid M. Daoush, Fatema Abdel Mouez, Mona Hassan "Fabrication and Characterization of Tungsten Heavy Alloys Using Chemical Reduction and Mechanical Alloying Methods", Open Journal of Applied Sciences, 3, 15-27(2013).

26. A.A. El-Daly, M. Abdelhameed, M. Hashish, Walid M. Daoush “Fabrication of silicon carbide reinforced aluminum matrix nanocomposites and characterization of its mechanical properties using non-destructive technique”, Materials Science and Engineering: A 559, 384-393(2013).

25.Walid M. Daoush,ToyokoImae "Syntheses and Characterizations of Multi-walled Carbon Nanotubes-Supported Palladium Nanocomposites", Journal of Materials Research, 27(13)1680-1687 (2012).

24. Sayed F. Moustafa, Walid M. Daoush, Ahmed Ibrahim, Erich Neubauer "Hot Forging and Hot Pressing of AlSi Powder Compared to Conventional Powder Metallurgy Route", Journal of Materials Sciences and  Application, Vol. 2, 1127-1133 ( 2011).

23. Walid M. Daoush"Synthesis and Characterizations of Nanosized Fe₃O₄ for Biomedical Applications", World Journal of Engineering Vol.2, 161-162 (2010).

22.Wei Li, Walid M. Daoush, AdityaBothate, Z. Abdel-Hamid, RidvanYamanoglu, Eugene Olevsky, SayedMoustafa, Randall M. German."Influence of Powder Preparation on Consolidation Behavior and Properties of Tungsten-Copper Alloys", Advances in Powder Metallurgy&Particulate  Materials,  Vol. 1, 245-257 (2010).

21.H.A.Sallam, W.M.El-Meligy, E.A.Mohamed, Walid .M.Daoush, A.G.Moustafa "Utilization of the Hyperfine Structure of the Doped Iron Nuclei to Elucidate the Structural, Electric and Magnetic Properties of La_1-xCa_xMn_0.95Fe_0.05O₃ Perovskite System", Arab Journal of Nuclear Science and  Applications, Vol. 43, No 1, 138-150 (2010).

20. Walid M. Daoush, B.K.Lim, C.B.Mo, D.H.Nam, S. H. Hong "Electrical and Mechanical Properties of Carbon Nanotube Reinforced Copper Nanocomposites Fabricated by Electroless Deposition Process" Materials Science & Engineering A, Vol. 513-514, 247- 253 (2009).

19.Walid M. Daoush, Hee S. Park, Kyong H. Lee, Sayed F. Moustafa, Soon H. Hong  " Effect of Binder Compositions on Microstructure, Hardness and Magnetic Properties of (Ta, Nb)C-Co and (Ta,Nb)C-Ni Cemented Carbides, Inter. J. of Ref. Met. and Hard Mat., Vol.27, 669-675 (2009).

18.Walid M. Daoush, Kyong H. Lee, Hee S. Park, Soon H. Hong“Effect of Liquid Phase Composition on the Microstructure and Properties of (W, Ti) C Cemented Carbide Cutting Tools “Inter. J. of Ref. Met. and Hard Mat., Vol. 27, No.1, 83-89 ( 2009).

17.Walid M. Daoush, Sayed F. Moustafa "Coated powders 'a good base' for intermetallics" Metal Powder Report, Vol 63, No 11, pp. 16 (2008).

16. A.G. Mostafa, E.K. Abdel-Khalek, Walid M. Daoush, M.Y.Hassaan  "Structural, Magnetic and Electrical Transport Properties of the La_0.70Sr_0.30Mn_0.9657Fe_0.04O3+δ Perovskite" Journal of Hyperfine Interaction, vol. 184, pp. 167( 2008).

15.Walid M. Daoush "Processing and Characterization of CNT/Cu Nanocomposites by Powder Technology" Journal of Powder Metallurgy and Metal Ceramics, Vol. 47, Nos. 9-10, pp 531(2008).

14. A.G. Mostafa, E.K. Abdel-Khalek, Walid M. Daoush, S.F. Moustfa, “Study of Some co-Precipitated Manganite Peroveskite Samples Doped Iron”  Journal of Magnetism and Magnetic Materials, Vol.  320, No.24, pp 3356 (2008).

13. S. H. Kaytbay and Walid M. Daoush “Phase Identification and Magnetic Properties of Nanocrystalline Fe₅₀Cu₅₀”, Journal of Powder Metallurgy Progress, Vol.7, No.2, pp. 111 (2007).

12.Walid M. Daoush and O.A. Elkady “Beating the force field with PM shield materials” Metal Powder Report, Vol 62, No 8, pp. 22(2007).

11.Walid M. Daoush "Synthesis and Consolidation of Nano-Sized NiCo Powder by Powder Technology Rout"; Mater. Sci .Forum, Vols., 561-565, pp. 1425 (2007).

10.Walid M. Daoush, Kyong H. Lee, Hee S. Park, Soon H. Hong "Effect of Metallic Binder Composition on Microstructure and Hardness of (W, Ti)C Cemented Carbides" J. of Korean Powder  Metallurgy Institute, Vol.14, pp.208 (2007) (in Korean).

9.Walid M. Daoush "Processing of FeCoNanosized Soft-Magnetic Material by Powder metallurgy Technique" Mater. Sci .Forum, Vols., 558-559, pp. 707 (2007).

8.Walid M. Daoush, and Sayed F. Moustafa “Coating points a way for synthesis of tough intermetallics”, Metal Powder Report, Vol. 62, No. 1, pp. 30 (2007).

7. S.H. Kaytbay S.F. Moustafa and Walid M. Daoush “Solid-State Reaction in Al-Fe Binary System Induced by Mechanical Alloying” Journal of Defect and Diffusion, vol.272, pp. 15 (2007).

6. Sayed F. Moustafa, Walid M. Daoush "Synthesis of Nanosized Fe-Ni Powder by Chemical Process for Magnetic Applications,” journal of Materials Processing Technology Vol. 181, pp.59 (2007).

5. S.H. Mansour, N.M.Ahemed and WalidM.Daoush “Studies on Magnetic Pigmented Polyester Composites”, Polymer-Plastics Technology and Engineering, Vol. 46, pp. 85 (2007).

4.A. Francis, Walid M. Daoush "Synthesis and Magnetic Characteristics of Crystallized Ceramic in the BaO–NiO-TiO₂–Fe₂O₃ System,” journal of Materials Processing Technology Vol. 181, pp. 213 (2007).

3.Walid M. Daoush and Sayed F. Moustafa “Processing of Metallic Filters by Powder Metallurgy Technique”  Journal of Powder Metallurgy Progress, Vol. 6, No.4, pp. 164 (2006).

2. S.H. El-Sabbagh, N.M. Ahmed, Walid M. Daoush “Colored Rubber Vulcanizates with Some Magnetic Properties” Journal of Applied Polymer Science, Vol. 102, pp. 494 (2006).

1. Sayed F. Moustafa, Walid.M. Rashad Daoush, E.E. El- Shereafy “Cu/Matrix Composites Produced with either Coated or Uncoated Reinforcement Powders” Canadian Metallurgical Quaterly, Vol. 40, No., 4, pp. 533 (2001).

4-      REFEREED CONFERENCES PUBLICATIONS(students names underlined)

11-El Kady, O.A.,Daoush, W.M.,Elsayed, A., Abdallah, M., Dawood, O.M.“Enhancement of physical and mechanical properties of oxide dispersion strengthened tungsten heavy alloys” Euro PM 2014 Congress and Exhibition.

10- H. M. Yehya, W. M. Daoush, M. H. El-Sayed,A. E. El-Nikhaily”Effect of Ni Binder Content on Microstructure, Hardness and Wear Properties of (Ta, Nb) C/Ni Cermets Fabricated by Powder Mixing and Coating Routs”3rd International Conference in Africa and Asia on Welding and Failure Analysis of Engineering Materials, 2-5 November, 2015, Luxor, Egypt.

9-HalfaHossam, DaoushWalid “Preparation of 2-5 µm Magnetite Powder from High Carbon Ferrochrome (Fe-Cr) Alloy”,  23^rd International Conference on Metallurgy and Materials, METAL 2014, 21-23 May 2014, Brno,  Czech Republic.

8- Walid. M. Daoush “Recycling of Magnetic Materials and Cellulose Fibers from the Underground Metro Tickets”The fourth international conference of BeniSuef University, 18-19 Feb. (2014), BeniSuef University.https://gomhuriaonline.com/main_edu.asp?v_article_id=145645

7- Walid. M. Daoush, E. Gordo, P. Alvaredo, El Sayed K. Maree, Sayed F. Moustafa, Zeinab Abdel Hamid, Ahmed A. Atlam, Amir A. El Sayed“Microstructure and Hardness of Fe-TiCNCermets Fabricated by Powder blending and Powder Coating Routes Followed by Powder Metallurgy Process” The 2012 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM’12), COEX, Seoul, South Korea,, 26-30 (August) (2012).

6-Walid M. Daoush,W. Bradbury, E. Olevsky, Randall M. German” Consolidation of Si₃N₄/Cu Composite powders Fabricated by Electroless Deposition Technique” 18th International Conference on Composites Materials, ICCM 2011; Jeju; South Korea; 21 - 26 August 2011, Code 96311.

5-Wei Li, Randall M. German, AdityaBothate,Walid M. Daoush, Eugene A. Olevsky, Z. Abdel-Hamid, Sayed F. Moustafa“Barriers of W-Cu Alloy Consolidation by Spark Plasma Sintering" 8th International Conference on Tungsten, Refractory and Hardmaterials 2011; San Francisco,  CA; United States; 18 - 21 May 2011, Code 98754.

4-Randall M. German, AdityaBothate, Wei Li, Eugene A. Olevsky, Walid M. Daoush, Sayed F. Moustafa “Advances in W-Cu: New Powder Systems" 8th International Conference on Tungsten, Refractory and Hardmaterials 2011; San Francisco, CA; United States; 18 - 21 May 2011, Code 98754.

3- Randall M. German, Wei Li, Walid M. Daoush, AdityaBothate, Z. Abdel-Hamid, RidvanYamanoglu, Eugene  Olevsky, SayedMoustafa” Powder fabrication role in the sintering and properties of tungsten-copper alloys” Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010.

2-Walid M. Daoush "Processing and Characterizations of CNT/Cu Sintered Materials" The 1^st International Conference in Advanced Materials and Nanotechnology, NRC, Cairo, Egypt 3-5 Dec. (2007).

1- S. F. Moustafa, Z.Abdel-Hamid, S.S Abdel Rehim, W.M. RashadDaoush “Processing of Ni/Al intermetallic and its composites using coating route” Powder Metallurgy World Congress & Exhibition, PM 2004, Vienna, Austria, 17-21 Oct. (2004).

NATIONAL/INTERNATIONAL PRESENTATIONS:

1. 1.      2015 international conference of Powder Metallurgy and Particulate Materials, San Diego, California, USA, 17-20 May(2015).
2. 2.      The fourth international conference of BeniSuef  University, Egypt, 18-19 Feb. (2014).
3. 3.      International Conference on Composite Materials (ICCM18), ICC, Jeju Korea, 21-26 Aug. (2011).
4. International Conference on Materials Imperatives in the New Millennium [MINM2010] Cairo, Egypt, 29 Nov.-2 Dec. 2010.
5. First International Pharmaceutical Sciences Conference, Tanta Univ., Egypt, Nov. 18-19, 2009.
6. 2008 Full conference of Korea Powder Metallurgy Institute, Nov. 13-14, 2008.
7. Spring Symposium of Korea Powder Metallurgy Institute, Chunbuck Univ., April 10-11, 2008.
8. The sixth Korea-Japan Joint Symposium on Composite Materials, 1-2Nov. (2007), POSTEC, Korea.
9. 1st Workshop of the Advanced Materials & Applied Nanotechnology Group, AMANTG (26-27, Nov, 2006), NRC, Cairo, Egypt.
10. First Afro-Asian Conference on Advanced Materials Science and Technology (AMSAT06), Nov.13-16, 2006, Cairo, Egypt.
11. Powder Metallurgy Congress and Exhibition, (24-28 Sept. 2006) Busan, Korea.
12. The US-Egypt Workshop on Synthesis, Characterizations and Industrial Applications of Nanoparticles and Nanostructure Materials, at 12-15 Nov. 2005, Mubarak City, Alexandria, Egypt.
13. 4th Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic,    Superconducting and Nano materials, at 17-20 Sept., 2005, Cairo., Egypt.
14. 14.  Us-Egypt Workshop on Advances in Science and Technology of Treatment and Utilization of Industrial Wastes, at Jun 6-10, 2004, Cairo Egypt.

FUNDING:

• International project with Department of Materials Research at ARC Seibersdorf Research Center GmbH, Seibersdorf, Austria entitled "Copper-Graphite Composite" from 2001-2003 (Role-Co PI).

• US-Egypt international project with San Diego State University and NSF entitled"Development of Nanosized W-Cu composites by Powder Technology Process" from 2009-2012 (Role-PI and Co PI from 2012 to 2016).

• National Project with the Egyptian Science and Technology Development Foundation entitled      "Development of Tungsten Heavy Alloys for Replacing the Imported Products" from 2009-2011 (Role- Co PI).

• International Project PCI Mediterraneo funded by AECID with Carlos III University entitled "Development of a New Generation of Tool Materials Using Powder Metallurgy Processing" from 2010-2012 (Role PI).

References

• Prof. Soon H. Hong

Department of Materials Science and Technology

Korea Advanced Institute of Science and Technology, South Korea

Email: [email protected]

• Prof. ToyokoImae

Chair Professor at Nagoya University, Japan

Email: [email protected]

• Prof. Randall M. German

Professor at San Diego State University, California; USA

 Email: [email protected]

[email protected]

• Prof. Khaled B. Morsi

Professor at San Diego State University, California; USA

Email: [email protected]

• Prof. Elena Gordo

Prof. at Faculty of Engineering, Carlos III University, Madrid, Spain

Email: [email protected]

• Dr.FawadInam

Director of the Department of Mechanical Engineering at

Northumbria University, UK.

Email: [email protected].

https://www.scopus.com/authid/detail.uri?authorId=56809523500

https://www.scopus.com/authid/detail.uri?authorId=16023626900

https://www.scopus.com/authid/detail.uri?authorId=13003446500

https://www.scopus.com/authid/detail.uri?authorId=7401637859

https://www.scopus.com/authid/detail.uri?authorId=55885841500

https://www.scopus.com/authid/detail.uri?authorId=24823152100

https://www.bangor.ac.uk/chemistry/IP/index.php

[email protected]

Prof. Igor F. Perepichka

Professor of Chemistry,

School of Chemistry,

Bangor University,

Bangor LL57 2UW,

United Kingdom

Tel.: +44 - (0)1248 - 382386

E-mail: [email protected];  [email protected] 

Webpage:  https://www.bangor.ac.uk/chemistry/IP/index.php 

h-index: 36               https://scholar.google.co.uk/citations?user=wrYu7kAAAAAJ

ORCID ID:  0000-0001-6672-3103  

Researcher ID:  F-7993-2016 

Scopus Author ID:  7004127147 

Google Scholar: https://scholar.google.co.uk/citations?user=wrYu7kAAAAAJ

Research Gate:  https://www.researchgate.net/profile/Igor_Perepichka/info 
LinkedIn:  https://www.linkedin.com/in/igor-perepichka-8b521635/

Biography

Igor Perepichka is a Professor of Chemistry at Bangor University, UK. He obtained his MSC Degree (Diploma in Chemical Engineering) from Donetsk Technical University in 1981 and his PhD in Organic Chemistry from the National Academy of Sciences of Ukraine (Institute of Physical Organic Chemistry, IPOCC NASU) in 1987. He started his career at IPOCC NASU in Ukraine as an engineer in 1981 and was promoted to Senior Research Scientist in 1989. He has held several visiting positions, including Alexander von Humboldt Fellow (Würzburg University, Germany, 1995–1997), Visiting Scientist (CEA Saclay, France, 1999 and CNRS, Angers, 2000–2001), Invited Professor (Angers University, 2001–2002), Senior Research Associate (Durham University, 2003–2007). In 2007 he moved to the University of Central Lancashire (Preston, UK) as Reader in Chemistry. In 2010 he was appointed as Professor of Chemistry at Bangor University, UK. His work is documented in over 100 papers in refereed journals, over 20 patents and two dozen books and book chapters, including “Handbook of Thiophene-Based Materials: Applications in Organic Electronics and Photonics” (I. F. Perepichka, D. F. Perepichka, Two-Volumes Set, Wiley, 2009).

Research area

Prof Perepichka’s field of research is organic materials chemistry. The main research activity focuses on design, synthesis and studies of novel organic π-functional systems, from small molecules to conjugated polymeric materials, toward their applications in organic electronics, optoelectronics and photonics. Current research interests encompass the development of functional π-conjugated materials with tailored electronic properties in view of applications in solar energy conversion, electronic and photonic devices, and nanoscience: novel conjugated π-functional systems, reactions and methods of their synthesis; conjugated polymers with tailored properties and functions; conductive, semiconductive and photoconductive pi-conjugated materials (from small molecules to oligomers and polymers); charge, electron and energy transfer processes in pi-systems; intermolecular and intramolecular charge transfer processes in π-conjugated systems; electroactive and photoactive π-functional systems; organic nanomaterials, supramolecular architectures and self-organized systems; organic molecular and polymeric materials for light-emitting devices, organic photovoltaics, field-effect transistors, electrochromic devices, non-linear optics, nanotechnologies, sensors/biosensors etc.

https://www.scopus.com/authid/detail.uri?authorId=7004886581

 https://www.scopus.com/authid/detail.uri?authorId=16021778800

Scopus: https://www.scopus.com/authid/detail.uri?authorId=13404144500

https://www.scopus.com/authid/detail.uri?authorId=8449363400

https://www.scopus.com/authid/detail.uri?authorId=8902726600

 https://www.scopus.com/authid/detail.uri?authorId=6603056427

https://www.scopus.com/authid/detail.uri?authorId=37019046500

Scopus ID: 57204150976

1. Personal Details

• Name & Surname:  Morteza Ehsani
• Date and place of birth:  03/02/1972, Noor, Iran
• Marital status: Married
• Nationality: Iranian
• Language: English (writing, reading, speaking)

 
 
2. Educational Qualification                                                         

• B.Sc. (Chemical Engineering), University of Science & Technology of Iran, Tehran (1989-94). Thesis: “Design and Simulation of Fluidized Bed Reactor”.
• M.Sc. (Chemical Engineering), University of Science & Technology of Mazandaran, Iran (1994-97). Thesis: “Preparation and Synthesis of Urethane Alkyd Resin for Using in Industrial Coatings”.
• Ph.D. (Polymer Engineering), Polymer and Petrochemical Institute, Tehran (1998-2004). Thesis: “Multi-Component Polymeric Alloys as Outdoor High Voltage Insulators“.
• Research visitor Collaboration with Professor H. Borsi and Professor E. Gockenbach, Schering Institute, Leibniz University, Hannover, Germany (2003-2005).

 
3. Teaching Experience                                                                   

• Physical Chemistry of Polymers
• Polymer Recycling
• Polymeric Resins (Epoxy, Polyester, Polyurethanes…)
• Surface coatings (Resin & Paint )
• Polymer technology

4. Research Interests                                                                        

• Nano Technology and Nano Composites
• Polymeric Electrical Insulation
• Surface coatings  (Resins and Paints)
• Powder coatings
• Polymeric Alloys
• Synthesis of  Resins
• Biomaterials

 
5. Employment                                                                                

1. Iran Polymer and Petrochemical Institute (IPPI), 2015-Present, Professor of Polymer Engineering
2. Iran Polymer and Petrochemical Institute (IPPI), 2009-2015, Associate Professor of Polymer Engineering
3. Iran Polymer and Petrochemical Institute (IPPI), 2004-2009, Assistant Professor of Polymer Engineering
4. Islamic Azad University, 2015- 2017 Sep,  Deputy of Financial and Administration
5. Islamic Azad University, 2014- 2015,  Executive Deputy
6. Iran Polymer and Petrochemical Institute (IPPI), 2012-2014, Deputy of Financial and Administration
7. Iran Polymer and Petrochemical Institute (IPPI), 2010-2012, Chief of Polymer Processing Faculty
8. Iran Polymer and Petrochemical Institute (IPPI), 2008-2010, Deputy of Financial and Administration
9. Iran Polymer and Petrochemical Institute (IPPI), 2006-2008, Chief of Polymer technology Incubator
10. PEKA Chemi, Tehran, 2004-2006, Vice President and Technical Consultant
11. Schering Institute, University of Hannover, Germany, 2003-2004, Research visitor Collaboration with Professor H. Borsi and Professor E.Gockenbach
12. Tarbiat Moalem University, Tehran, 2004, Lecturer in “Polymer Chemistry and Technology”
13. Islamic Azad University of Shahr Rey, Tehran, 1999-2003, Lecturer in “Polymer Chemistry and Technology”
14. Hawilux Paint & Resin CO. Tehran, 1998-2003, R & D Deputy Managing Director
15. Hawilux Paint & Resin CO. Tehran, 1998-2003, Powder Coating Manager
16. Pars Pamchal CO, Tehran, 1994-98, Senior Chemist
17. South Korea,  1999, Training in Hyundai CO
18. Milano, Italy,  2002, Training in O.M.C. CO

19. South Korea, 2003, Training in Hyundai CO.

6. HONOURS AND AWARDS

1. 2014, Selected as the Distinguished Researcher (Academic Staff) of Iran Polymer & Petrochemical Institute.
2. 2011, Selected as An Excellent Lecturerof 26^thInternational Power System Conference, (PSC2011), Tehran, Iran.
3. 2009, Selected as the Distinguished Researcher (Academic Staff) of IranPolymer & Petrochemical Institute.

 
7. OTHER PROFESSIONAL ACTIVITIES                                       


A) REVIEWS

• Advances in Polymer Technology
• Journal of European Transactions on Electrical Power, Published by John Wiley.
• International Journal of the Physical Sciences (English) Published by Academic Journals
• European Polymer Journal (English), Published by Elsevier Science Ltd
• Journal of Applied Polymer Science (English), Published by John Wiley.
• Polymer Testing
• Applied Composite Materials (English), Published by Springer.
• AIMS Materials Science
• Iranian Polymer Journal (English), Published by Springer.
• Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran Polymer Institute
• Progress in Color, Colorants and Coatings (English), Published by Science and Color Technology institute.
• Journal of Color Science and Technology (Persian), Published by Science and Color Technology institute.
• Iran National Science Foundation
• 4^th International color and coating congress (English), Amir kabir University, Tehran.
•  International power system conference, PSC 2005-2014, Tehran, Iran
• 9^th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran
• 8^th International Seminar on Polymer Science and Technology, ISPST 2005, Tehran, Iran
• Polymer Compounds, Composites & Foams, ISPST 2005, Tehran, Iran

 
B) SCIENTIFIC SOCIETY and JOURNAL MEMBER

• Journal of Nanostructure in Chemistry
• Iran Polymer Society
• Iranian National Electro-technical Committee (INEC)
• Iranian Insulators Technical Committee
• Progress in Color, Colorants and Coatings  (English) (Member of Organizing Committee &Board)
• Journal of Color Science and Technology (Persian) (Member of Organizing Committee &Board).

• Journal of Basparesh (Persian) (Member of Organizing Committee &Board).

PUBLICATIONS                                                                        
 
Book

1. M. Ehsani, A. Ghadami, "Polymers Recycling", (In Persian), ISBN: 978-600-93931-0-7, Iran Polymer and Petrochemical Institute Publisher, 2017.
   1. M. Ehsani, K. Khodabakhshi, "Handbook of Sustainable Polymers: Processing and Applications", Chapter: Developments and Applications of Sustainable Polylactic Acid Parts, (In English), Publisher: Pan Stanford Publishing, © Inc.,pp.395-448, ISBN:978-981-4613-53-8 (Hardcover), October 28, 2015.

3. M. Ehsani, J. Morshedian, G.R. Bakhshandeh, “New Polymeric Alloys as High Voltage Insulators”, (In English), ISBN: 978-3-8433-9250-1, Lambert Academic Publisher (Lap), Germany, 2011.
4. M. Ehsani, J. Morshedian, G.R. Bakhshandeh, "Polymeric Electrical Insulators", ISBN: 978-600-90570-3-0, (In Persian), Iran Polymer and Petrochemical Institute Publisher, 2010.
5. M. Ehsani,"Translation of Failures and Analyses on Powder Coatings", ISBN: 978-600-90570-2-3, (In Persian), Iran Polymer and Petrochemical Institute Publisher, 2008.
6. M. Barikani, M. Ehsani, “Chemistry and Technology of Polyurethane”, (In Persian),Published by: Ava matn, Tehran, 2008.
7. M. Ehsani, M. Almassi, “Powder Coatings, Chemistry, and Technology”,(In Persian), ISBN: 964-7751-61-3, Talaeih Publisher. 2005.

 
 
Patent

•   German Patent , DE 10 2004 010 278 A1

M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “Flexible Outdoor Insulator with Good Electrical, Mechanical and Aging Characteristics”; 2005.

•    Iranian Patent, NO: 30564

M. Ehsani, J. Morshedian, G.R. Bakhshandeh; "Production of Polymeric Insulation for Use as Transmission & Distribution of Power"; 2005.

•   IranianPatent, NO: 42681

M. Ehsani, Y. Jahani, "A New method for Improvement of Rheological Properties of PP-Talc Composites"; 2007.

• IranianPatent, NO:42608

M. Ehsani, Y. Jahani, "Recycling of Powder Coatings"; 2007.

• IranianPatent, NO:42679

M. Ehsani, Y. Jahani, "A New Additive for Thermal Satiability of PP-Talc Composites"; 2007.

• IranianPatent, NO:40364

M. Ehsani, M.Abtahi, GR. Bakhshandeh, "A New Processing Aid for Rubber Compounding"; 2007

• IranianPatent, NO: 45650

F. Farhang, M. Ehsani, S. H. Jazayeri, “Production of silicone coatings for using on porcelain insulators”; 2008.

• IranianPatent, NO:40365

M. Ehsani, M. Abtahi, G.R. Bakhshandeh, "The Usage of Powder Coating Waste as Filler in Rubber Compounds"; 2008.

• IranianPatent, NO:66052

M. Ehsani, M. Haghnegahdar, G.R. Bakhshandeh, G. Naderi, “Preparation of elastomer styrene butadiene/ powder color waste composite”; 2011

• IranianPatent, NO:65110

M. Ehsani, M. J. Azizi, G. Naderi, GR. Bakhshandeh, “Production of a blend based on butyl/chloroprene rubber”; 2011

• IranianPatent, NO:69413

M. Ehsani, et al. “Preparation of the resin paste dressing plant for periodental surgeries”; 2011.

• IranianPatent, NO: 74448

M. Ehsani, Farhadinejad, Z., Mommen-Bellah, S., Alavi, S.M.B. (2012):   Design of a formulation based on nano particles for application in dry transformers,

• Iranian Patent, NO: 035056

M. Ehsani, E. Aram, Z., H. A. Khonakdar, "preparation of polymeric electrolyte for solar cell application".

Journal Papers
 

1. Majid Habibelahi, Morteza Ehsani, JalilMorshedian, "Effects of Mixing Strategy on Catalyst-Assisted Reactive Blending of Polycarbonate and Polyethylene Terephthalate",Journal of Vinyl and Additive Technology, Accepted at 20 December 2017.

1. Nouri Arezu, Zahedi Ehsan, Ehsani Morteza, Nouri Azita, Balali Ebrahim,"Understanding the Molecular Mechanism of Thio-Claisen Rearrangement of Allyl Phenyl Sulfide and Allyl Vinyl Sulfide Using Bonding Evolution Theory Coupled With NCI Analysis", Journal of Sulfur Chemistry, Accepted at 11 – JAN- 2018.

1. Marzieh Noori, Fatemeh Ravar, Morteza Ehsani,  “Preparation of PVA Nanofibers Reinforced With Magnetic Graphene by Electrospinning Method and Investigation of Their Degradation Kinetics Using Master Plot Analyses on Solid State”, Journal of Thermal Analysis and Calorimetry,First Online: 28 December 2017, pages:1-10. 2017, https://doi.org/10.1007/s10973-017-6927-7.

1. Jafar Rezania, Hadi Behzadi, Abbas Shockravi, Morteza Ehsani, Elaheh Akbarzadeh, "Synthesis and DFT Calculation of Some 2-aminothiazoles, Journal of Molecular Structure.Volume 1157, Pages 300–305, 5 April 2018.

1. M Kazemi-Ashtiani, M Zandi, M Ehsani, P Shokrollahi, H Baharvand. "Surface Modification of Poly(2-hydroxyethylmethacrylate) Hydrogel for Contact Lens Application", Polymers for Advanced Technologies, Version of Record online: | DOI: 10.1002/pat.4233.\First published: 12 January 2018

1. A. Shababdoust, M Zandi, M Ehsani, P Shokrollahi, "Fabrication of Curcumin-loaded Electrospun Nanofiberous Polyurethanes with Anti-bacterial Activity", Progress in Biomaterials, Accepted at November 2017.

1. Shila Shirdel Ghadikolaei, Abdollah Omrani, Morteza Ehsani. "Non-Isothermal Degradation Kinetics of Ethylene-Vinyl Acetate Copolymer Nanocomposite Reinforced With Modified Bacterial Cellulose Nanofibers Using Advanced Isoconversional and Master Plot Analyses", Thermochimica Acta, Volume 655, Pages 87-93, 2017

1. Jafar Rezania, Abbas Shockravi, Morteza Ehsani, Vahid Vatanpour, "Novel polyimides based on diamine containing thiazole units with thioether linkage and pyridine as pendent group: Synthesis and characterization", High Performance Polymers, Publication date: 2017/10/2,    DOI: 10.1177/0954008317732397, 2017

1. Maryam Halvaee, Khadijeh Didehban, Vahabodin Goodarzi, Mehdi Ghaffari, Morteza Ehsani, Mohammad Reza Saeb, "Comparison of pristine and polyaniline‐grafted MWCNTs as conductive sensor elements for phase change materials: Thermal conductivity trend analysis",  Journal of Applied Polymer Science, Volume 134, Issue 47. 2017

1. Z. Rajabtabar Darvish, M. Ehsani, A. Ghadami, M. B. Alavi, "Importance of Gel Coating in Composite Structures and the Effect of Nanofillers on Their Properties Improvement", Polymerization, Quarterly, 2017,Volume 7, Number 2,Pages 52-63,ISSN: 2252-0449.

1. Kh. Ghanbari, M. Ehsani, A. Jannesari, M. Mohseni, M. Ghaffari, Thermoanalytical study of siloxane-polyurethane coatings: Kinetic deconvolution of overlapping heterogeneous curing reactions, Progress in Organic Coatings, 112, 234-243, 2017.

1. M Bahrami, JC Furgal, H Hashemi, M Ehsani, Y Jahani, T Goodson, R Laine, "[PhSiO1.5]8,10,12 as nanoreactors for non-enzymatic introduction of ortho, meta or para-hydroxyl groups to aromatic molecules". Dalton Transactions, 2017 Jul 11; 46(27):8797-8808.

1. E. Aram, M. Ehsani, H.A. Khonakdar, Chemically functionalized graphene nano- sheets and their influence on thermal stability, mechanical, morphological and electrical properties of poly (methyl methacrylate)/poly(ethylene oxide) blend, Polymer-Plastics Technology and Engineeringvolume 57, issue 3, pages: 156-165, 2018.

1. S. Abdollahi, M. Ehsani, J. Morshedian, H. A Khonakdar, "Structural and electrochemical properties of PEO/PAN nanofibrous blends: Prediction of graphene localization", Polymer Composites, DOI: 10.1002/pc.24390.

1. S. Abdollahi, M. Ehsani, J. Morshedian, H. A Khonakdar, Morphology and physical properties of electrospun polyethylene oxide/polyacrylonitrile mats and related graphene-based nanocomposites,  Journal of Vinyl and additive Technology,  Aug 2016,  DOI: 10.1002/vnl.21576

1. A Ghadami, M Ehsani, H Haddadi, B. Kaffashi, "Effect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings", Progress in Color, Colorants and Coatings, Vol. 10, No.1, 2017, pages 31 – 41.

1. M Kazemi-Ashtiani, M Zandi, J Barzin, Y Tahamtan,  M Ghanian, A Moradmand, M Ehsani, H Nezari, M Rezaei Larijani, H Baharvand, "Substrate-mediated commitment of human embryonic stem cells for hepatic differentiation", Journal of Biomedical Materials Research: Part A.  2016 Nov;104(11):2861-72

1. I Shirdel Ghadikolaei, A Omrani,  M Ehsani, "Impact of Bacterial Cellulose Nanofibers on the Nonisothermal Crystallization Kinetics of Ethylene−Vinyl Acetate Copolymer", Industrial & Engineering Chemistry Research, 2016, 55, 8248−8257

1. A. Ghadami, M. Ehsani, H.A. Khonakdar, "A comprehensive study on morphological and rheological behavior of PET and PEN nanocomposite blends in presence of graphene", Journal of Vinyl and Additive Technology, December, 23, S1, 2017, E160–E169.

1. M.Gaffari, M.Ehsani, M.vandalvand, E.avazverdi, A.askari, A.goudarzi, "Studying the effect of micro- and nano-sized ZnO particles on the curing kinetic of epoxy/polyaminoamide system", Progress in organic coatings, 89, 277-283, 2015.

1. M Bahrami, JC Furgal, H Hashemi, M Ehsani, Y Jahani, T Goodson, R Laine,   "Synthesis and Characterization of Nano-Building Blocks [O-RStyrPhSiO1. 5] 10, 12 (R= Me-, MeO-, NBoc-and CN. Unexpected Photophysical Properties Arising from Apparent Asymmetric Cage Functionalization as Supported by Modelling Studies", Journal of Physical Chemistry C, 119 (28), pp 15846–15858, 2015

1. A Ghadami, M Ehsani, HA Khonakdar, "Interrelationship of thermal and mechanical properties of poly (ethylene terephthalate)/poly (ethylene 2, 6‐naphthalate)/graphene nanocomposites", Journal of Vinyl and Additive Technology, 23, 3, 2017,: 210–218

1. M. Faghih, M.Zandi, P.Shokrollahi, M. Ehsani, "Synthesis and Characterization of Curcumin Segmented Polyurethane with Induced Antiplatelet Activity", Journal of Polymer Research. 2015, 22:179.

1. Hossein  Ghanian, Zahra  Farzaneh, Jalal Barzin, Mojgan Zandi, Mohammad Kazemi-ashtiani,  Mehdi Alikhani, Morteza Ehsani, Hossein Baharvand, "Nanotopographical Control of Human Embryonic Stem Cell Differentiation into Definitive Endoderm Using Fibrous Substrates", Journal of Biomedical Materials Research: Part A, Volume 103, Issue 11, November 2015, Pages 3539–3553.

1. A Motahari, AA Rostami, A Omrani, M Ehsani, "On the Thermal Degradation of a Novel Epoxy-Based Nanocomposite Cured With Tryptophan as an Environment-Friendly Curing Agent", Journal of Macromolecular Science, Part B, 54 (5), 517-532.

1. Masoumeh Nazem Salimi. Abolfazl Alizadeh Sahraei, Majid Baniasadi, Karen Abrinia, Morteza Ehsani,"Synergistic Effect of Carbon Nanotubes and Copper Particles in an Epoxy Based Nanocomposite Using Electroless Copper Deposited Carbon Nanotubes: Part I – Mechanical Properties", Journal of Composite Materials, 2015. 50, no. 14 (2015): 1909-1920.

1. M. Mohamadi, A. A. Yousefi, M. Ehsani, "Characterizing films of polyethylene blends: An application of colorimetric parameters measurements", Progress in Color, Colorants and Coatings, 8, 219-235, 2015.

1. E Aram, M Ehsani, HA Khonakdar, "Improvement of ionic conductivity and performance of quasi-solid-state dye sensitized solar cell using PEO/PMMA gel electrolyte", Thermochimica Acta, Vol. 615, pp. 61-67, 2015.

1. S Salehi, M Ehsani, H. A. Khonakdar,, "Assessment of thermal, morphological, and mechanical properties of poly(methyl methacrylate)/glass flake composites", Journal of Vinyl and Additive Technology, 23, 1, 2017, Pages: 62–69.

1. M. Ehsani, K.  Khodabakhshi, M. Asgari, "Lactide synthesis optimization; an investigation on temperature, catalyst and pressure effects", E-Polymer, 14 (5), 353-361, 2014

1. M Ghaffari, R. Naderi, M.  Ehsani,“Effect of silane as surface modifier and coupling agent on rheological and protective performance of  epoxy/nanoglassflake coating systems”, Iranian Polymer Journal, 23 (7), 559-567, 2013

1. A. Ghadami, M. Ehsani, H.A. Khonakdar, “Vinyl ester/ glass flake nanocomposites: An overview of chemical and physical properties", Journal of composite materials, Vol.76, Issue 1, Pages 238-243, 2013.

1. Motahari, A. Omrani, A.A. Rostami, M. Ehsani, “Preparation and characterization of a novel epoxy based nanocomposite using tryptophan as an eco-friendly curing agent”, Thermochimica Acta, Vol. 574,  pp. 38-46, 2013

1. M. Ghaffari, M. Ehsani, H. A. Khonakdar, “Morphology, rheological and protective properties of epoxy/nano-glassflake systems”, Progress in Organic Coatings, Vol 77, Issue 1, 124-130, 2014

1. M  Khiabani Moghadam; J  Morshedian; M  Ehsani; R  Laine; L  Yan Kuang; N  Umehara,“Study on effects of Ph12SQ on the thermal stability and mechanical properties of high temperature vulcanized (HTV) silicone rubber”,  IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 21, Issue 1, pp. 244-252,  2014.

1. M.  Khiabani Moghadam, J  Morshedian, M  Ehsani, M  Bahrami, H  Sadadi, “Lifetime prediction of HV Silicone rubber insulators based on mechanical tests after thermal ageing”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 20, Issue 3, pp. 711-716, June 2013.

1. Omrani A.Rostami A.Ravari F.Ehsani M."The relationship between composition and electrical properties of brass covered by a nanocomposite coating of glycerol diglycidyl ether: An EIS and DMTA study", Progress in organic coatings; 76, 2-3; 360-366;

1. M. Ehsani, H.A. Khonakdar, A. Ghadami, “Assessment of morphological, thermal and viscoelastic properties of epoxy vinyl ester coating composites: role of glass flake and mixing method”,Progress in Organic Coatings, 76,238-243, 2013.

1. Ghadami, M. Ehsani, H. A. Khonakdar, “Effect of micro and nano glass flake on curing kinetic and anti -corrosive properties of vinyl ester composite coating”, Journal of Advanced Materials and Novel Coatings, 4, 286-275, 2013.

1. M Haghnegahdar, G Naderi, GR Bakhshandeh, S Shokoohi, M Ehsani, “An Investigation into Elastomer Nanocomposites Based on SBR/Epoxy-Polyester Hybrid/Organoclay”, Materials Research Innovations, Vol.17, No 7,483-489, 2013.

1. Z. Soltani, F. Ziaei, M. Ehsani, M. Gaffari, H. Afrideh, "Study of the electron beam effect on mechanical properties and structure of polyethylene – heydroxyapatite nanocomposite", Journal of Alloys and Composite Materials, (Persian), Accepted, inpress.

1. S. Zooghi, G.Naderi, GR.Bakhshandeh, M.Ehsani, S.Shokoohi, "Study of mechanical properties and nano structure of nanocomposite based on butadiene rubber- nanoclay and epoxy-polyester hybride, Journal of Science and Technology of Polymer, (Persian), 26, 2, 2013.

1. Z. Soltani, F. Ziaei, M. Gaffari, H. Afarideh, M. Ehsani,“Mechanical and Thermal Properties & Morphological Studies of 10 MeV Electron Beam Irradiated LDPE/Hydroxyapatite Nano-Composite”, Radiation Physics and Chemistry, Volume 83, February 2013, Pages 79-85.

1. Z. Farhadinejad, M. Ehsani, S. Momenbellah, "Dynamic mechanical and thermal behavior evaluation of an epoxy/anhydride/nano Al2O3 composite system”, High Performance Polymers, 25 (5),518-525, 2013.

1. Omrani, A. Rostami, A.Ravari, M. Ehsani, “The relationship between composition and electrical properties of brass covered by a nanocomposite coating of glycerol diglycidyl ether: An EIS and DMTA study”, Progress in Organic Coatings, 76, 360-366, 2013.

1. Farhadinejad Z., Ehsani M., Khosravian B., Ebrahimi G.: Investigation of epoxy-polyester resin resulting from waste powder coating on the physical and mechanical properties of wood poly (propylene) composite: Journal of Color Science and Technology (In Persian), Vol 6. 321-327, 2013.

1. Asadinezhad, S. H. Jafari, U. Wagenknecht, M.Ehsani, "Nanofilled Polypropylene/Poly (trimethylene terephthalate) Blends: A Morphological and Mechanical Properties Study”, Journal of Macromolecular Science: Part B: Physics. 52, 897-909, 2013.

1. M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, "The kinetic analysis of isothermal curing reaction of an epoxy resin-glass flake nano composite", Thermochimica Acta, Vol. 549,  pp. 81-86, 2012

1. Z. Farhadinejad, M. Ehsani, S. Momenbellah, M. M. Saei-Shirazi, S. M. B. Alavi and H. Borsi, “An Investigation of Thermal, Physical and Electrical Properties and Morphological Behavior on Nano Epoxy Composite Insulation”, IEEE Transaction on nanotechnology, Vol. 11, Issue: 5  pp. 957 – 963, 2012.

1. Z. Farhadinejad, M. Ehsani, I. Ahmadi-Joneidi, A.A. Shayegani-Akmal, H. Mohseni, “An Investigation of the Effect of UVC Radiation on Thermal, Electrical Properties and morphological behavior of Silicone Rubber Insulators”, IEEE Transaction on Dielectric and Electrical Insulations, Vol. 19, Issue 5, pp. 1740-1749, 2012.

1. Z. Farhadinejad, M. Ehsani, B. Khosravian, G. Ebrahimi, “Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler”, European Journal of Wood and Wood Products, 2012, Volume 70, Issue 6, pp 823-828.

1. M. Ghaffari, M. Ehsani, H. A. Khonakdar, “Effect of surface chemical treatment on carbon steel/epoxy coating Delamination”, Journal of Advanced Materials and novel coatings, Vol. 1, pp.35-40, (2012).

1. F. Ravari, A. omrani, A. A. Rostami, M. Ehsani, “Ageing effects on electrical, morphology, and mechanical properties of a low viscous epoxy nanocomposite”, Polymer Degradation and Stability, vol. 97, pp. 929-935, 2012.

1. M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. V. Assche, H. Terryn, “Evaluation of curing kinetic parameters of an Epoxy/ Polyaminoamide/Nano-glassflake system by non-isothermal differential scanning Calorimetry”, Thermochimica Acta, 533, 10-15,2012.

1. M. Ehsani, Z. Farhadinejad, D. Ronasi, “Calculation of molecural weight and epoxy equivalent weight by proton nuclear magnetic resonance spectroscopy”, Bashparesh, 2, 16-21, 2012.

1. M. Mousaei, M.A. Faghihi Sani, S. Baghshahi, M. Ehsani, “Hydrothermal synthesis of CoAl2O4 blue nano-pigment”, Journal of Color Science and Thechnology (In Persian), vol 6,263-270 (2013).

1. Allahverdi, M. Ehsani, H. Janpour, “The Effect of Nanosilica on Mechanical, Thermal and Morphological Properties of Epoxy Coating”, Progress in Organic Coatings, 75, pp.543-548, 2012

1. M. Mohammadi, A. Yousefi, M. Ehsani, “Thermorheological analysis of blend of high- and low-density polyethylenes”, Journal of Polymer Research, 2012,19, 9798-9809.

1. M. Mohammadi, A. Yousefi, M. Ehsani, “Study of the thermal and mechanical properties of blown films of high- and low- density polyethylene blends”, Journal of Applied Polymer Science, 2012, 125, 755-767.

1. S. R. Mohammadi, H. A. Khonakdar, M. Ehsani, S. H. Jafari, U. Wagenknecht, B. Kretzschmar, “Investigation of Thermal Behavior and Decomposition Kinetic of PET/PEN Blends and their clay containing nanocomposites”, Journal of Polymer Research, 18: 1765-1775, 2011

1. M.A. Shamekhi, S.H. Jafari, H.A. Khonakdar, M. Ehsani, “Preparation and characterization of UV irradiation cross-linked LDPE/EVA blends”, Plastic, Rubber and Composites, 39: 109-110, 2010

1. M. Ehsani. Y. Jahani, "An Investigation of Powder Coating Waste Effect on Morphological and Mechanical Properties of PP-Talc Composites", Journal of Color Science and Technology (Persian), 3: 223-232, 2010

1. H.A. Khonakdar, H. Jafari,, M. Ehsani, A. Asadinejad, “Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models”, Iranian Polymer and Technology Journal (Persian), 5: 399-405, 2010

1. M. Ehsani, A. A. Yousefi, S. Samiei Yeganeh, “Study of Rheological behaviors of Electrostatic Thermoset Powder Coatings”, E-Polymer, No.140, 2009

1. Y. Jahani, M. Ehsani, "The effects of Epoxy Resin Nano Particles on Shrinkage Behavior and Thermal Stability of Talc-Filled Polypropylene", Polymer Bulletin, 63: 743-754, 2009

1. M. Ehsani, M. Badripour, M. H. R. Ghoreishy, "Study and Evaluation of EPDM Increasing in NR/BR Compounds by Reactive Processing”, Iranian Polymer and Technology Journal (Persian), 18: 149-157, 2009

1. F. Farhang, M.Ehsani, S. H. Jazayeri, “Effects of the Filler Type and Quantity on the Flashover Voltage and Hydrophobicity of RTV Silicone Rubber Coatings”, Iranian Polymer Journal, 18: 149-157, 2009

1. Y. Jahani, M. Ehsani, “The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties”, Polymer Engineering & Science, 49: 619-629, 2009.

1. M. Ehsani, M. Abtahi, M.E. Zeynali, A.A. Harati, "LDPE/EPDM Blends with Unique Surface, Electrical and Mechanical Properties for Electrical Insulators", Iranian Polymer Journal, 18: 37-47, 2009.

1. S. H Jazayeri, M. Ehsani, F. Farhang, "Study of Silicone Rubber Coatings (RTV) Role on Improvement of the Ceramic Insulators Behavior in Contaminated Areas”, Journal of Color Science and Technology, 2: 9-22, 2008.

1. M. Ehsani, M. Barikani, T.S. Porkar, "Synthesis and Application of Silicone-Alkyds in Stoving Paint and Zinc-Rich Primers". Journal of Color Science and Technology. 2:123-128, 2008.

1. M. Razavi-Nouri, J. Morshedian, M. Ehsani, F. Faghihi, “Mechanical Properties & Morphology of Low Density Polyethylene/Polydimethylsiloxane Immisible Blends: Modeling & Influence of Curing Agent”, E-Polymers, 14: 1-14, 2008.

1. F. Faghihi, J. Morshedian, M. Razavi-Nouri, M. Ehsani, "Dynamic Rheological and Mechanical Behaviours of Poly (Dimethylsiloxane)/Low Density Polyethylene Immisible Blends: Interfacial Modification via Reactive Blending", Iranian Polymer Journal, 17: 755-765, 2008.

1. M. Ehsani, G.R. Bakhshandeh, J. Morshedian H. Borsi, E. Gockenbach; “The Dielectric Behavior of Outdoor High Voltage Polymeric Insulation Due to Environmental Aging”, Journal of European Transactions on Electrical Power, 17: 47-59, 2007

1. M. Ehsani, A. Harati, "Introduction to Powder Coating II”, Industry Journal Paint and Resin, 831-23, 2006

1. M. Ehsani, G.R. Bakhshandeh, F. Kavosi, "Application and Properties of Modified Asphalt with Scrap Tyres", Iranian Rubber Magazine Special Issue, Recycling of Rubber, 11(42): 94-100, 2006.

1. M. Ehsani, A. Harati, "Introduction to Powder Coating I”, Industry Journal Paint and Resin”, 8(26): 20-23, 2006.

1. M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh J. Morshedian; “Modified Silicone Rubber for Use as High Voltage Outdoor Insulators”, Journal of Advances in Polymer Technology, 24 (1): 51-61, 2005.

1. M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh; “An Investigation of Dynamic Mechanical, Thermal, and Electrical Properties of housing materials for outdoor Polymeric Insulators”, European Polymer Journal, 40(11): 2495-2503, 2004.

1. M. Ehsani, M. Barikani; Properties of Silicone Modified Alkyd Resin, Journal of Baspar, 3(3): 32, 2003

International and National Conferences

1. S.Abdollahi, M.Ehsani,J.Morshedian, H.A.Khonakdar, Structural and electrochemical properties of PEO/PAN/graphemenanofibrous membranes, Europe Africa Conference  PPS2017

2. M. Habibelahi, J. Morshedian, M. Ehsani, The Effect of Impact Modifiers of ABS, LLDPE and POE on mechanical Properties of Engineering Compounds of PC/PET, The First International Masterbatch &Polymer Compounds Conference 14-15 Feb 2016

3. R. Rezaie, M. Ehseni, A. A. Yousefi, D. Nazari, Rheological properties of PC and PET Blends, ISPST 2016

1. Z. Emami, M. Ehsani, M. Zandi, Preparation and characterization of oxidized alginate biopolymer: Effects of oxidation conditions, International Seminar on Polymer Science and Technology, 2016

1. M. Kazemi Ashtiani, M. Zandi, P. Shokrollahi, M. Ehsani, Ho. Baharvand, Chitosan-conjugated Poly(2-hydroxyethyl methacrylat e) for Contact Lens Application, International Seminar on Polymer Science and Technology, 2016

1. S. Azarabtin, M. Ehsani, S. M. M. Mortazavi, S. Ahmadjo, M. Sabzehkar, H. Ranjbar, The performance of waste disulfide oil (DSO) on the devulcanization of  waste tires, 12th International Seminar on Polymer Science and Technology, 2016

1. M. Zandi, M. Kazemi Ashtiani, P. Shokrollahi, M. Ehsani, Ho. Baharvand, Simple and Cost-Effective Method for Modification of PHEMA as Low Fouling Surface, ICANM 2015

1. M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand, Hybrid Nanofibrous Scaffolds with In Situ Pore Extension Potential, ICANM 2015

1. M. Mohammadi, A. Azizi, A. A. Yousefi, M. Ehsani, Effect of Temperature on melt behavior of Polyethylene Blends: a Study of Cole-Cole Plots, ISPST 2014, 6-9 October 2014

1. M. Bahrami, J. Furgal, M. Ehsani, Y. Jahani, R. Laine, Synthesis, characterization, and photophysical properties of polyfunctional nanobuilding phenylsilsesquioxanes: [R_0.5PhSiO_1.5]₁₀, [RPhSiO_1.5]₁₀ ,[R_0.5PhSiO_1.5]₁₂ and [RPhSiO1.5]12 compounds, ACS 248^th, San Francisco, CA, 2014

1. M. Mohammadi, A. Azizi, A. A. Yousefi, M. Ehsani,Investigating Han Plots of Polyethylene Blends at Different Temperatures, ISPST 2014, 6-9 October 2014

1. H. Enshaei, M. H. Beheshty, M. Ehsani, Investigation the Effect of Aromatic Amine on Curing and Thermal Behavior of Epoxy Resin, ISPST 2014, 6-9 October 2014

1. E. Aram, M. Ehsani, H. A. khonakdar, N. Riahi nouri, Poly(ethylene oxide)-poly(methyl methacrylate) gel electrolyte for dye-sensitized solar cells, ISPST 2014, 6-9 October 2014                            
2. M. Bahrami, M. Ehsani, Y. Jahani, M. Davachi, R. Laine, Diiodination of Deca and Dodeca Silsesquioxanes  A new rout to highly functionalized nano bulding block Silsesquixane cages, ISPST 2014, 6-9 October 2014

1. M. Ghaffari, M. Vandalvand, E. Avazverdi, M. Ehsani, The kinetic analysis of isothermal curing reaction of ZnO filled epoxy Resin, ISPST 2014, 6-9 October 2014

1. D. Fattahinezhad, M. B. alavi, M. Ehsani, Kh. Khodabakhshi, Investigating the Influence of Nanoglass Flake and Glassfibers on the Flaxtural Properties of Neopantylglycol Unsaturated Polyester Resin, ISPST 2014, 6-9 October 2014

1. Z. Rajabtabar, M. Ehsani, M. B. Alavi, Kh. Khodabakhshi, Investigation of Morphology and Impact Resistance of Nano-Graphene Composite based on Ester Gelcoats, ISPST 2014, 6-9 October 2014

1. Z. Rajabtabar, M. Ehsani, M. B. Alavi, Kh. Khodabakhshi, Study of Water Absorption Behavior in IPN Polymeric Systems, ISPST 2014, 6-9 October 2014

1. M. Habibelahi, M. Assemi, M. Ehsani, J. Morshedian, Structure Changes in the PC/PET Transesterification Affected by Reaction Time and Catalyst Concentration,ISPST 2014, 6-9 October 2014

1. M. Faghih abdollahi, M. Ehsani*, M. Zandi, P. Shokrollahi, The Effect of Diferuloylmethane as a Chain Extender on Surface Properties of Biodegradable Segmented Thermoplastic Polyurethane Elastomers, ISPST 2014, 6-9 October 2014                                 
2. M. Ehsani, B. Kaviani, S. Salehi, Study on Mechanical Properties, Thermal Stability and Crystallization Behavior of PET-glass Flake Nano Composites, ISPST 2014, 6-9 October 2014                                                                                                    

22. M. Ehsani, H. A. Khonakdar, S. Salehi, N. Riahi nouri, A. Mehdi Khani, Investigation of the effect of nano glass flake (NGF) on physical and optical properties of poly (methyl methacrylate) as substrate of solar cell, 28th international power system conference, Tehran, 2013.

23. B. Kaviani, M. Ehsani, H. A. Khonakdar, N. Riahi nouri, A. Mehdi Khani, Investigation of the effect of Nano Glass Flake on the properties of PET, 28th international power system conference, Tehran, 2013.

24. M. Ehsani, S. Salehi, B. Kaviani،"Preparation and Characterization of High Transparent PMMA/glass Flake Composites"،The 16th Iranian Chemistry Congress, Yazd University, 5-7 september 2013،Yazd University،2013

25. M. Ehsani, B. Kaviani, S. Salehi, Study on Mechanical Properties, Thermal Stability and Crystallization Behavior of PET-glass Flake Nano Composites،The 16th Iranian Chemistry Congress, Yazd University, 5-7 September 2013،Yazd University،2013

26. M. Mohammadi, A. A. Yousefi, M. Ehsani،Dynamic temperature sweep experiments on blend of high- and lowdensity polyethylene،ISPST2012, Amirkabir University of Technology, Tehran, Iran،2012

27. M. H. Ghanian, J. Barzin, M. Zandi, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand،Fabrication of Uniform Electrospun Poly(ε-caprolactone) Microfibers Using Cationic Surfactant،ISPST2012, Amirkabir University of Technology, Tehran, Iran،2012

28. M. H. Ghanian, M. Zandi, J. Barzin, M. Ehsani, M. Kazemi-Ashtiani, H. Baharvand،Reducing Diameter and Variability of Electrospun Poly(e-caprolactone) Nanofibers Using Charged Additives،The 14th Iranian National Chemical Engineering Congress (IChEC 2012) Sharif University of Technology،Sharif University of Technology, Tehran ،2012

29. M. H. Ghanian, M. Ehsani, J. Barzin, M. Zandi, M. K. Ashtiani, Optimizing Topographical Features of Electrospun Nanofibers foe Efficient Endodermal Differentation of Human Induced Pluripotent Stem Cells،10th Annual Meeting International Society for Stem Cell Research, June 13-16, 2012 ،Yokohama, Japan،2012

30. Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, Peyman Taheri, Herman Terryn, Investigation of the effect of chemical surface treatments on interfacial properties of Epoxy-carbon steel, ISPST2012,Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012.

31. Mehdi Gaffari, Morteza Ehsani, Hossein Ali Khonakdar, Investigation of morphology and rheological properties of glass flake/epoxy nanocomposites systems, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

32. Z. Farhadinezhad, M. Ehsani, S. Moemen bellah, M. B. Alavi،Study of the Effect of Nano Alumina on Electrical and Mechanical Properties of Cast Epoxy Composite،PPS 2011, November 15-17, 2011, Kish Island, Iran،Kish Island, Iran،2011

33. M. Ghaffari, M. Ehsani, H. A. Khonakdar, G. Van Assche, H. Terryn, Study on the Rheological Properties of Epoxy/Nano-Glassflake Composite،AERC 2011, 7th Annual European Rheology Conference, 10-14 May 2011،Russia،2011

34. Z.farhadinejad, M.Ehsani, S. Moemen bellah, S.M. B. Alavi, M. M. Saei-shirazi and H. Borsi, An investigation of the effect ofnano alumina on the electrical and thermal properties and morphological behavior of the cast epoxy nano composite,XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011

35. M. Bayani, M. Ehsani, A. Mehdikhani, The effect of ultraviolet (UV) radiation and humidity stress on silicone rubber insulator behavior, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011

36. Z. farhadinejad, M. Ehsani, S. Momen bellah, S. M. B. Alavi, Study of the effect of nano alumina on electrical and mechanical properties of cast epoxy composite, Proceedings of the Polymer Processing Society Asia/Australia Regional Meeting,  PPS-2011,  Kish Island (Iran), November 15-17, 2011

37. M.Ehsani, Z.farhadinejad, S. Moemen-bellah, S. M. B. Alavi, M. M. Saei Shirazi, H. Borsi, “Electrical, dynamic-mechanical, thermal and morphological behaviors of epoxy-nano alumina systems” 26^th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011

38. M. Bayani, M. Ehsani, A. Mehdikhani, Investigation of silicone insulators’ behaviour under ultraviolet (UV) radiation and humidity stress, 26^th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011

39. M.K. Moghadam, M. Keramati, H. Beirami and M. Ehsani, “Investigation on aging in different parts of an silicon insulator”, XVII International Symposium on High Voltage Engineering, Hannover, Germany, August 22-26, 2011

40. M.K. Moghadam, M. Keramati, I. Motamedi, H. Beirami and M. Ehsani, "Evaluation of aging in different parts of silicone insulator", 26^th International power system conference, PSC 2011, Tehran, Iran, 30 October-2 November 2011

41. M. Mousaei, M.A.Faghihi-Sani, S. Baghshahi, M. Ehsani, “Synthesis of blue pigment of nano alumina cobalt by hydrothermal method” 8^th Iranian conference of ceramic, Tehran, Iran, 3-4 May, 2011

42. H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Preparation and properties of nanoclay and powder coating waste in NBR compounds”, International Congress on Nanoscience an Nanotechnology, ICNN, Shiraz, Iran, 9-11 November 2010

43. H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, “investigation of mechanical and rheological properties of nanocomposites based on NBR/nanoclay”, 8^th Nanothechnology Iranian Student Conference, NaN, Mashhad, Iran, 1-2 December, 2010

44. H.R. Ebrahimi Jahromi, G. R. Bakhshandeh, M. Ehsani, G. Naderi, A. Alipour, “Effect of two types of filler on cure characteristic and mechanical properties of NBR rubber compound”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.

45. B. Kaffashi, H. Haddadi, M. Ehsani, A. Ghadami, “The effect of modified glass flakes on rheological properties of glass flake-epoxy vinyl ester composites”, 13^th Iranian National Chemical Engineering Congress and 1^st International Regional Chemical and Petroleum Engineering, Kermanshah, Iran, 25-28 October, 2010

46. B. Kaffashi , M. Ehsani, H. Haddadi, “The effect of mixing procedure on rheological properties of glass flake-epoxy vinyl ester Composites” The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA- 2), Kish Island, Iran, Dec. 27-30, 2010

47. M. Ehsani, F. Farhang, Investigation of discharge voltage of porcelain insulators with different RTV silicone coatings in polluted environment”, 25^th International power system conference, PSC 2010, Tehran, Iran, 2010

48. S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer nanocomposites based on butadiene rubber/ powder coating waste/ nanoclay”, International Congress on Nanoscience and Nanotechnology Shiraz, Iran, 9-11 November, 2010.

49. S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, S. Shokoohi, “Polymer Nanocomposites Based on Butadiene Rubber/Powder coating waste/nanoclay”, ASPM 2010, 8-10 Austria, 2010.  

50. S. Zoghi, G. Bakhshandeh, G. Naderi, M. Ehsani, “Improvement of mechanical properties and morphology of BR elastomer by Nanoclay and waste paint powder”, 10th Iran Rubber Industries Conference & Expo, Tehran, Iran, 2010.

51. M. .Mohammadi, A. A. Yousefi, M. Ehsani, "Differential Scanning Calorimetric Investigation of Polyethylene Blends", 9^th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.

52. B.Shirkvand, M. Ehsani, A.Rabbii "Synthesis of Naphthalene Sulfonate Formaldehyde Condensate as in Dispersing Agent", 9^th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.

53. M. Ghafari, M. Ehsani, A. Ghadami, H.A.Khonakdar "Epoxy/Glass Flake Composite: Curing Kinetics, Glass Transition Temperature and degradation Temprature", 9^th International Seminar on Polymer Science and Technology, ISPST2009, Tehran, Iran, October 2009.

54. M. Ehsani, Y. Jahani, M. Gafari, "The Effect of Epoxy-Polyester on Rheology, Morphology and Mechanical Properties of Talc-Reinforced Polypropylene". European Polymer Congers, EPF 2009, Graz, Austria., 2009

55. S. H. Jazayeri, M. Ehsani, F. Farhang, " Improvement of Porcelain Insulators Behavior Under Wet & Polluted Conditions", The 2^nd International Conference on Ceramics (Global Roadmap for Ceramics-ICC2) Proceedings, Verona, Italia, (29-4) Jun- July, 2008

56. M. Badripour, M. Ehsani, M.; Ghoreishy, M.H.R."Effect of pre-cured EPDM in NRBR blend properties for tire sidewall", 9th Iranian National Rubber Conference, Kish, Iran, 2008.
57. M. Abtahi,  M. E. Zeynali, M. Ehsani, A. A. Harati, T. Darestani, "LDPE/EPDM Blends with Unique Surface, Electrical & Mechanical Properties for Electrical Insulator", The 5th International Chemical Engineering Congress & Exhibition, Kish, Iran, 2008.

58. M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Erosion and Tracking Characterization of Outdoor Composite Insulators”, 15th International Symposium on High Voltage Engineering (ISH, Ljubljana, Slovenia), August 27-31, 2007.

59. M. Ehsani, M.Abtahi, A.Harati, “Study of Electrical, Surface and Mechanical Properties of EPDM-LDPE Blends for Use as Outdoor Electrical Insulators”, 15th International Symposium on High Voltage Engineering (ISH), Ljubljana, Slovenia, August 27-31, 2007.

60. Y. Jahani, M. Ehsani, "Modification of PP-Talc Composite by Reactive Mixing With Hybrid Epoxy-Polyester Resin", IUPAC-2006, South Africa, Syellenbusch, 2006.

61. M. Ehsani, M. Karabi, S. Soltani, “Application of Stress Relaxation Behavior for Evaluation of Processability of Raw Rubbers”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, , Yamagata, Japan July 2-6, 2006.

62. M. Abtahi, M. Ehsani, T. Darestani Farahani, “Powder Coating Waste as New Filler for Rubber Compound”, Polymer Processing Society (PPS-2006) 22^nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.

63. M. Karrabi, M. Ehsani, S. Soltani, “Curing Characterization of Styrene-butadiene-rubber compound using RPA”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.

64. M. Abtahi, M.E. Zeynali, M. Ehsani, A.A. Harati, “Study of Electrical, Rheological and Mechanical Properties of LDPE/EPDM Blends for Use as Electrical Insulators”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.

65. H. Baharvand, M. Ehsani, “Mechanical, Thermal and Rheological Behavior of Styrene-Butadiene Rubber Filled with Nano Organoclay as Filler”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Yamagata, Japan, July 2-6, 2006.

66. Y. Jahani, M. Ehsani, “Effects of Powder Coating Waste on Mechanical, Rheological, and Thermal Properties of Talc Filled PP”, Polymer Processing Society (PPS-2006) 22nd Annual Meeting, Japan, July 2-6, 2006, Yamagata.

67. M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Surface Degradation of Outdoor Polymeric Insulators Resulting from Electrical and Environmental Stress”, 20th International Power System Conference (PSC 2005, Tehran, Iran), November 14-16, 2005.

68. M. Ehsani, M. Abtahi, M. E. Zeynali, A.A. Harati, “Effect of EPDM on the Mechanical, Thermal, and Dynamical Mechanical Properties of Blends LDPE”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran), September27-29, 2005.

69. M. E. Zeynali, M. Abtahi, M. Ehsani, A.A. Harati, “Synthesis of partially hydrolyzed polyacrylamide & investigation of solution properties (viscosity behavior)”. International Seminar on Polymer Science and Technology (ISPST 2005, Tehran, Iran.

70. M. Ehsani,  G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Study ofElectrical, Mechanical and Surface Properties of Composite Insulators”, 14th International Symposium on High Voltage Engineering (ISH), Beijing, China, August 25-29, 2005.

71. M. Ehsani, G.R. Bakhshandeh, J. Morshedian, H. Borsi, E. Gockenbach, “Effect of LDPE on the Mechanical, Electrical and Dynamical Mechanical Properties of Blends of EPDM-Silicone Rubbers”, Polymer Processing Society (PPS-2005) America’s Regional Meeting, Quebec, Canada August 14-17, 2005.

72. M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”, Grenzflächen in Elektrischen Isoliersystemen, Beanspruchungen, Design, prǘfverfahren, Lebensdauer, Hanau, Germany, 8-9 March 2005.

73. M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian G.R. Bakhshandeh, “Improvement of Tracking and Erosion Behavior of Outdoor Insulation with a new Polymeric Alloy”,  IEEE International Symposium on Electrical Insulation, Indiana, USA, 19-22 September 2004.

74. M. Ehsani, H. Borsi, E. Gockenbach,  G.R. Bakhshandeh, J. Morshedian “Improvement of Electrical, Mechanical and Surface Properties of Silicone Insulators”, IEEE Conference on Electrical Insulation and Dielectric Phenomena, Boulder, Colorado, USA, 17-20 October, 2004.

75. M. Ehsani, H. Borsi, E. Gockenbach, G.R. Bakhshandeh, J. Morshedian, N. Abedi.; “study of Electrical, Dynamical and Mechanical and Surface Properties of Silicone-EPDM Blends”, 8^th  IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.

76. M. Ehsani, H. Borsi, E. Gockenbach, J. Morshedian, G.R. Bakhshandeh, A. A.  Shayegani, “Effect of Aging on Dielectric Behavior of Outdoor Polymeric Insulators”, 8^th IEEE International Conferences on Solid Dielectrics, Toulouse, France, July 5-9, 2004.

77. M. Ehsani, M. Barikani, “Properties of Urethane Alkyd Polymers”, International Symposium on Polymer Science & TechnologyTehran, Iran, 3-5 November, 1997.

E-mail: [email protected], [email protected]

===========================================

Curriculum vitae

Amir Khojastehnezhad

H-index: 20, Citation > 1000

Editor Board of Asian Journal of Nanoscience and Materials

https://orcid.org/0000-0002-9078-7323

Address: Unit 8, P 65, Fallahi 50.8, Fallahi Blvd, Mashhad, Iran

E-mail: [email protected], [email protected]

Related Link:

My Google Scholar Link: https://scholar.google.com.tr/citations?user=aK65zuwAAAAJ&hl=en

My Publons Link: https://publons.com/researcher/1499563/amir-khojastehnezhad/metrics/

Personal Data:

Sex: Male; Nationality: Iran; Date of Birth: 25-08-1984

Education:

Ph. D: Organic Chemistry, Ferdowsi University Mashhad, Khorasan, Iran. (Sep. 2011 to Nov. 2015)

Thesis: Synthesis and characterization of functionalized magnetic nanoparticles and investigation of their applications in organic synthesis and computational study of mechanism of 1,3-dipolar cycloaddition reaction. Supervisors: Prof. Hossein Eshghi and Prof. Mehdi Bakavoli

Master of Science: Organic Chemistry, Azad University, Mashhad, Iran. (Sep. 2008 to Aug. 2011)

Thesis: Synthesis of heterocyclic systems (Acridine, Quinoline, Xanthene) and nitrills using oximes and solid and liquid catalysts. Supervisors: Prof. Abolghasem Davoodnia and Prof. Mehdi Bakavoli

Bachelor of Science: Pure Chemistry, Azad University of Mashhad, Iran. (Sep. 2003 to May 2008)

Research Experiences:

Postdoctoral: Ferdowsi University of Mashhad, Razavi Khorasan, Iran. (Jan. 2018 to Jan. 2020)

Thesis: Design and synthesis of magnetic metal organic frameworks and investigation of their catalytic applications as green catalysts in organic synthesis. Supervisor: Prof. Mehdi Bakavoli

Research Opportunity: Michigan State University, Michigan, USA. (Jan. 2015 to July 2015)

Thesis: Asymmetric Synthesis of Chromane Derivatives via Chlorination/Phenolcyclization Reaction.

Supervisor: Prof. Babak Borhan

Ferdowsi University of Mashhad, Faculty of Sciences, Mashhad, Iran. (Jan. 2016 to July 2019)

Advisor of two Ph.D theses about preparation, and application of heterogeneous catalysts.

Islamic Azad University of Mashhad, Iran.(Jan. 2016 to Dec. 2019)

Advisor of four Ph.D and master theses about preparation and application of heterogeneous catalysts.

Hakim Sabzevari University, Sabzevar,Iran. (Jan. 2014 to Jan. 2016)

Advisor of two master theses about preparation and application of heterogeneous catalysts.

Publications (ISI, web of Science):

1. Z. Ghadamyari, A. Khojastehnezhad, S. M. Seyedi, A. Shiri, Co(II)‐Porphyrin Immobilized on Graphene Oxide: An Efficient Catalyst for the Beckmann Rearrangemen. ChemistrySelect 2019, 4, 10920, IF: 1.7.

2. Z. Ghadamyari, A. Shiri, A. Khojastehnezhad, S. M. Seyedi, Zirconium (IV) porphyrin graphene oxide: a new and efficient catalyst for the synthesis of 3, 4‐dihydropyrimidin‐2(1H)‐ones. Applied Organometallic Chemistry 2019, 33, 5091, IF: 3.6.

3. F. Ataie, A. Davoodnia, A. Khojastehnezhad, Graphene oxide functionalized organic-inorganic hybrid (GO-Si-NH₂-PMo): an efficient and catalyst for the synthesis of tetrahydrobenzo[b]pyran derivatives. Polycyclic Aromatic Compounds 2019, DOI: 10.1080/10406638.2019.1622137, IF: 2.0.

4. M. Asadian; A. Davoodnia; S. A. Beyramabadi, A. Khojastehnezhad, The First Pyrazolium-Based Ionic Liquid Containing Phosphotungstic Acid Immobilized on CuFe₂O₄@SiO₂: A Recyclable Organic-Inorganic Nanohybrid Catalyst for the Synthesis of Polyhydroquinolines. Iranian Journal of Chemistry and Chemical Engineering 2019, Published Online, IF: 1.0.

5. A. Khojastehnezhad, M. Bakavoli, A. Javid, M. M. Khakzad Siuki, M. Shahidzadeh. Synthesis, characterization, and investigation of catalytic activity of copper (II) porphyrin graphene oxide for azide–alkyne cycloaddition. Research on Chemical Intermediate 2019, 45, 4473, IF: 1.7.

6. M. Rohaniyan, A. Davoodnia, S. A. Beyramabadi, A. Khojastehnezhad, Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation, characterization, and first catalytic application in the multi-component synthesis of tetrahydrobenzo[a]xanthene-11-ones. Applied Organometallic Chemistry 2019, 4881, IF: 3.6.

7. A. Khojastehnezhad, M. Bakavoli, A. Javid, M. M. Khakzad Siuki, F. Moeinpour, Covalently copper(II) porphyrin cross-linked graphene oxide: Preparation and catalytic activity. Catalysis Letter 2019, 149, 713, IF: 2.9.

8. M. Keyhanian, A. Shiri, H, Eshghi, A. Khojastehnezhad, Synthesis, characterization and first application of covalently immobilized nickel-porphyrin on graphene oxide for Suzuki cross coupling reaction. New Journal of Chemistry 2018, 42, 19433, IF: 3.2.

9. M. Keyhanian, A. Shiri, H, Eshghi, A. Khojastehnezhad, Novel design of recyclable copper (II) complex supported on magnetic nanoparticles as an efficient catalyst for the Beckmann rearrangement in PEG. Applied Organometallic Chemistry 2018, 32, 4344, IF: 3.6.

10. A. Taleghani, M. Iranshahi, M.A. Nasseri, A. Khojastehnezhad, Phytochemical Screening and Green Biosynthesis of Silver Nanoparticles Using Unripe Fruit of Ziziphus Vulgaris Journal of Nanostructures 2018, 8, 300, IF: 0.5.

11. A. Javid, A. Khojastehnezhad, A. J. L. Pombeiro, Preparation, Characterization and Application of Preyssler Immobilized on Magnetic Nanoparticles as a Green and Recoverable Catalyst for the Synthesis of Imidazoles. Russian Journal of General Chemistry 2017, 87, 3000, IF: 0.6.

12. N. Hosseini, A. Davoodnia, F. Rostami-Charati, N. Tavakoli, A. Khojastehnezhad, Synthesis of New Pyrimido[4 0,5 0:3,4]pyrazolo[1,2-b]phthalazine-4,7,12-triones: Derivatives of a New Heterocyclic Ring System. Journal of Heterocyclic Chemistry 2018, 55, 161, IF: 0.9.

13. A. Khojastehnezhad, B. Maleki, B. Karrabi, E. Rezaei Seresht, Synthesis of Highly Functionalized Piperidines using Polyphosphoric Acid Supported on Silica-coated Magnetic Nanoparticles. Organic Preparation Procedure International 2017, 49, 338, IF: 1.6.

14. B. Maleki, A. Mofrad, R. Tayebee, A. Khojastehnezhad, H. Alinezhad, E. Rezaei Seresht, One-Pot Synthesis of 1,4-Dihydropyridine Derivatives Catalyzed by Silica-Coated Magnetic NiFe₂O₄ Nanoparticles-Supported H₁₄[NaP₅W₃₀O₁₁₀]. Russian Journal of General Chemistry 2017, 87, 2922, IF: 0.6.

15. A. Davoodnia, F. Tajfirooz, M. Pordel, M. Ebrahimi, A. Khojastehnezhad, Novel CuFe₂O₄@SiO₂-P₂O₅H magnetic nanoparticles: Preparation, characterization, and its first catalytic application to the synthesis of 1,8-dioxo-octahydroxanthenes. Applied Organometallic Chemistry 2018, 32, 3930 IF: 3.6.

16. A. Khojastehnezhad, A. Javid, F. Moeinpour, NiFe₂O₄@SiO₂-PPA Magnetic Nanoparticle: A Green Nanocatalyst for the Synthesis of β-Acetamido Ketones. Polycyclic Aromatic Compounds 2017, Published online, DOI: 10.1080/10406638.2017.1335218, IF: 2.0.

17. N. Hosseininasab, A. Davoodnia, F. Rostami-Charati, A. Khojastehnezhad, Preparation, characterization, and first catalytic application of a novel phosphotungstic acid-containing ionic liquid immobilized on CuFe₂O₄@SiO₂ magnetic nanoparticles in the synthesis of 1H-pyrazolo [1,2-b] phthalazine-5, 10-diones. Russian Journal of General Chemistry 2017, 87, 2436, IF: 0.6.

18. B. Maleki, M. Baghayeri, S. Ayazi, R. Tayebee, A. Khojastehnezhad, Ultrasound Promoted Facile One Pot Synthesis of Highly Substituted Pyran Derivatives Catalyzed by Silica-Coated Magnetic NiFe₂O₄ Nanoparticles-Supported H₁₄[NaP₅W₃₀O₁₁₀] under Mild Conditions. RSC Advances 2016, 6, 96644, IF: 3.0.

19. A. Javid, A. Khojastehnezhad, H. Eshghi, F. Moeinpour, F. F. Bamoharram, J. Ebrahimi. Synthesis of Pyranopyrazoles using a Magnetically Separable Modified Preyssler Heteropoly Acid. Organic Preparation Procedure International 2016, 48, 377, IF: 1.6.

20.B. Maleki, N. Nasiri, R. Tayebee, A. Khojastehnezhad, Green Synthesis of Tetrahydrobenzo[b]pyrans and Pyranopyrazoles Catalyzed by Nano-structured diphosphate in Water. RSC Advances 2016, 6, 79128, IF: 3.0.

21.A. Khojastehnezhad, H. Eshghi, F. Moeinpour, A. Raoufi, Mechanism of 1,3-dipolar cycloaddition reactions of indan-1-one enamines with arylnitrile oxide: a DFT analysis. Journal of the Iranian Chemical Society 2016, 13, 1629, IF: 1.5.

22.A. Khojastehnezhad, H. Eshghi, F. Moeinpour, M. Bakavoli, J. Tajabadi. A computational study on the mechanism of 1,3-Dipolar cycloaddition reactions between 2-ethylthio-4-phenyl-1-azetin and some substituted nitrile oxides. Structural Chemistry 2016, 27, 1041, IF: 2.0.

23. B. Maleki, E. Rezaee Seresht, H. Eshghi, A. Khojastehnezhad, H. Veisi. One-Pot Synthesis of 1-Amidoalkyl-2-naphthols Catalyzed by Polyphosphoric Acid Supported on Silica-Coated NiFe₂O₄ Nanoparticle. Organic Preparation Procedure International 2016, 48, 37, IF: 1.6.

24. H. Eshghi, A. Khojastehnezhad, F. Moeinpour, Sh. Rezaeian, M. Bakavoli, M. Teymouri, A. Rostami, K. Haghbeen. Nanomagnetic organiceinorganic hybrid (Fe@Si-Gu-Prs): a novel magnetically green catalyst for the synthesis of tetrahydropyridine derivatives at room temperature under solvent-free conditions. Tetrahedron 2015, 71, 436, IF: 2.6.

25.H. Eshghi, A. Khojastehnezhad, F. Moeinpour, M. Bakavoli. Mechanism and regioselectivity of 1,3-dipolar cycloaddition reactions of bicyclic monoterpenes with aryl and heteroaryl nitrile oxides: a DFT study. Canadian Journal of Chemistry 2015, 93, 749, IF: 1.2.

26.B. Maleki, H. Eshghi, A. Khojastehnezhad, R. Tayebee, S. Sedigh Ashrafi, G. Esmailian Kahoo, F. Moeinpour. Silica coated magnetic NiFe₂O₄ nanoparticle supported phosphomolybdic acid; synthesis, preparation and its application as a heterogeneous and recyclable catalyst for the one-pot synthesis of tri- and tetra-substituted imidazoles under solvent free conditions. RSC Advances 2015, 5, 64850, IF: 3.0.

27.F. Moeinpour, A. Khojastehnezhad. Theoretical Analysis of the Mechanism and Regioselectivity of the 1,3-dipolar Cycloaddition of E-3-(dimethylamino)-1-(10H-phenothiazin-2-yl)prop-2-en-1-one with Some Nitrilimines Using DFT and the Distortion/interaction Model. Acta Chimica Slovenica2015, 62, 403, IF: 1.0.

28.B. Malekia, S. Chalaki, S. Sedigh Ashrafi, E. Rezaee Seresht, F. Moeinpour, A. Khojastehnezhad, R. Tayebee. Caesium carbonate supported on hydroxyapatite-encapsulated Ni_0.5Zn_0.5Fe₂O₄ nanocrystallites as a novel magnetically basic catalyst for the one-pot synthesis of pyrazolo[1,2-b]phthalazine-5,10-diones. Applied Organometallic Chemistry 2015, 29, 290, IF: 3.6.

29.A. Khojastehnezhad, F. Moeinpour, M. Vafaee. Molybdenum Oxide Supported on Silica (MoO₃/SiO₂): An Efficient and Reusable Catalyst for the Synthesis of 1,8-dioxodecahydroacridines Under Solvent-free Conditions. Journal of Mexican Chemical Society 2015, 59, 29, IF: 1.0.

30.H. Eshghi, A. Javid, A. Khojastehnezhad, Farid Moeinpour, F. F. Bamoharram, M. Bakavoli, M. Mirzaei. Preyssler heteropolyacid supported on silica coated NiFe₂O₄ nanoparticles for the catalytic synthesis of bis(dihydropyrimidinone)benzene and 3,4‐dihydropyrimidin‐2(1H)‐ones. Chinese Journal of Catalysis 2015, 36, 299 IF: 3.5.

31.F. Moeinpour, A. Khojastehnezhad. Cesium carbonate supported on hydroxyapatite coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles as an efficient and green catalyst for the synthesis of pyrano[2,3-c]pyrazoles. Chinese Chemical Letters 2015, 26, 575, IF: 2.6.

32.B. Maleki, H. Eshghi, M. Barghamadi, N. Nasiri, A. Khojastehnezhad, S. Sedigh Ashrafi, O. Pourshiani. Silica-coated magnetic NiFe₂O₄ nanoparticlessupported H₃PW₁₂O₄₀; synthesis, preparation, and application as an efficient, magnetic, green catalyst for one-pot synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3-c]pyrazole derivatives. Research on Chemical Intermediate 2015, 42, 3071, IF: 1.7.

33. H. Eshghi, A. Khojastehnezhad, Farid Moeinpour, M. Bakavoli, S. M. Seyedi, M. Abbasi. Synthesis, characterization and first application of keggin-type heteropoly acids supported on silica coated NiFe₂O₄ as novel magnetically catalysts for the synthesis of tetrahydropyridines. RSC Advances 2014, 4, 39782, IF: 3.0.

34. H. Eshghi, A. Khojastehnezhad, Farid Moeinpour, M. Bakavoli, N. Zeinabi, S. Allameh. Nanomagnetically modified polyphosphoric acid (NiFe₂O₄@SiO₂–PPA): an efficient, fast, and reusable catalyst for the synthesis of 2-thioxoquinazolinones under solvent-free conditions. Research on Chemical Intermediate 2014, 41, 7915, IF: 1.7.

35.M. Rahimizadeh, S. M. Seyedi, M. Abbasi, H. Eshghi, A. Khojastehnezhad, Farid Moeinpour, M. Bakavoli. Nanomagnetically modified ferric hydrogen sulfate (NiFe₂O₄@SiO₂-FHS): a reusable green catalyst for the synthesis of highly functionalized piperidine derivatives. Journal of the Iranian Chemical Society 2014, 12, 839, IF: 1.4.

36. M. Ghiaci, M. Zarghani, F. Moeinpour, A. Khojastehnezhad. Preparation, characterization and application of silica-supported palladium complex as a new and heterogeneous catalyst for Suzuki and Sonogashira reactions. Applied Organometallic Chemistry 2014, 28, 589, IF: 3.6.

37. M. Rahimizadeh, H. Eshghi, A. Khojastehnezhad, F. Moeinpour, M. Bakavoli, J. Tajabadi. Density functional theory study of the Regio and stereoselectivity in 1,3-Dipolar cycloddition reactions between N-methyl methylenenitrone and fluorinated dipolarophiles. Journal of Flourine Chemistry 2014, 162, 60, IF: 2.0.

38.M. Ghiaci, M. Zarghani, A. Khojastehnezhad, F. Moeinpour. Preparation, characterization and first application of silica supported Palladium-N-heterocyclic carbene as a new and green catalyst for C-C coupling reactions. RSC Advances 2014, 4, 15496, IF: 3.0.

39.F. Moeinpour, A. Khojastehnezhad, Polyphosphoric acid supported on Ni_0.5Zn_0.5Fe₂O₄ nanoparticles as a magnetically-recoverable green catalyst for the synthesis of pyranopyrazoles, Arabian Journal of Chemistry 2014, 10, 3468, IF: 3.0.

40. A. Khojastehnezhad, M. Rahimizadeh, F. Moeinpour, H. Eshghi, M. Bakavoli. Nano magnetically silica-supported ferric hydrogensulfate as a new and green catalyst for the Synthesis of 1,8-dioxodecahydroacridines. Chinese Journal of Catalysis 2014, 35, 376, IF: 3.5.

41. A. Khojastehnezhad, M. Rahimizadeh, F. Moeinpour, H. Eshghi, M. Bakavoli. Polyphosphoric acid supported on silica-coated NiFe₂O₄ nanoparticles: An efficient and magnetically-recoverable catalyst for N-formylation of amines. Comptes Rendus Chimie 2014, 17, 459, IF: 1.9.

42. F. Moeinpour, A. Khojastehnezhad. 1, 3-dipolar cycloaddition of C-phenyl carbamoyl-N-phenyl nitrone with some dialkyl-substituted 2-benzylidenecyclopropane-1,1-dicarboxylates: theoretical analysis of mechanism and regioselectivity. Journal of the Iranian Chemical Society 2014, 11, 1459, IF: 1.4.

43.J. Tajabadi, M. Bakavoli, M. Gholizadeh, H. Eshghi, A. Khojastehnezhad. 1,3-Dipolar cycloaddition reactions between ethyl diazoacetate and substituted alkynes: A density functional theory study. Progress in Reaction Kinetics and Mechanism 2014, 39, 233, IF: 0.6.

44. F. Moeinpour, N. Dorostkar, A. Sardashti, A. Khojastehnezhad, M. Vafaei. Multicomponent preparation of 1-amidoalkyl-2-naphthols using silica-supported molybdenum oxide (MoO₃/SiO₂) as a mild and recyclable catalyst. Research on Chemical Intermediate 2013, 40, 3145, IF: 1.7.

45. A. Khojastehnezhad, F. Moeinpour, A.R. Shams. PPA-SiO₂ Catalyzed One-pot Synthesis of 1,4-Dihydropyridines Under Solvent-free Conditions. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Meta Chemistry 2012, 42, 273, IF: 0.6.

46. S. Allameh, A. Davoodnia, A. Khojastehnezhad. An efficient and eco-friendly synthesis of 14-aryl-14Hdibenzo[a,j]xanthenes using H₄[SiW₁₂O₄₀] as a heterogeneous and reusable catalyst under solvent-free conditions. Chinese Chemical Letters 2012, 23, 17, IF: 2.6.

47. M. Zeinali-Dastmalbaf, A. Davoodnia, M.M. Heravi, N. Tavakoli-Hoseini ,A. Khojastehnezhad, H.A. Zamani. Silica Gel-Supported Polyphosphoric Acid (PPA-SiO₂) Catalyzed One-Pot Multi-Component Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones and -thiones: An Efficient Method for the Biginelli Reaction. Bulletin of the Korean Chemical Society 2012, 32, 656-658, IF: 0.6.

48. F. Moeinpour, A. Sardashti-Birjandi, N. Dorostkar-Ahmadi, A. Khojastehnezhad, F. S Mohseni-Shahri, SbCl₃-SiO₂ Catalyzed Simple and Efficient One-Pot Synthesis of 1-Amidoalkyl-2-Naphthols Under Solvent-Free Conditions. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Meta Chemistry 2012, 42, 287, IF: 0.6.

49. A. Davoodnia, A. Khojastehnezhad. Carbon-based solid acid catalyzed synthesis of polyhydroquinoline derivatives via hantzsch reaction under solvent-free conditions. Journal of the Chilean Chemical Society 2012, 57, 1199, IF: 1.0.

50. F. Moeinpour, A. Khojastehnezhad. An Efficient One-Pot Synthesis of 1,8-Dioxodecahydroacridines Using Silica-Supported Polyphosphoric Acid (PPA-SiO₂) under Solvent-Free Conditions. Journal of Chemistry 2012, 9, 504, IF: 0.5.

51. A. Javid, A. Khojastehnezhad, M. Heravi, F.F. Bamoharram, Silica-supported preyssler nanoparticles catalyzed simple and efficient one-pot synthesis of 1, 8-dioxodecahydroacridines in aqueous media. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Meta Chemistry 2012, 42, 14, IF: 0.6.

52.A. Khojastehnezhad, F. Moeinpour, A. Davoodnia. PPA-SiO₂ catalyzed efficient synthesis of polyhydroquinoline derivatives through Hantzsch multicomponent condensation under solvent-free conditions. Chinese Chemical Letters 2011, 22, 807, IF: 2.6.

53.A. Khojastehnezhad, A. Davoodnia, M. Bakavoli, N. Tavakoli-Hoseini, M. Zeinali-Dastmalbaf. Silica Gel-Supported Polyphosphoric Acid (PPA/SiO₂): An Efficient and Reusable Heterogeneous Catalyst for Facile Synthesis of 14-Aryl-14H-dibenzo[a,j]xanthenes under Solvent-free Conditions. Chinese Journal of Chemistry 2011, 29, 2421, IF: 2.4.

54. A. Davoodnia, A. Khojastehnezhad, M. Bakavoli, N. Tavakoli-Hoseini. SO₃H-Functionalized Ionic Liquids: Green, Efficient and Reusable Catalysts for the Facile Dehydration of Aldoximes into Nitriles. Chinese Journal of Chemistry 2011, 29, 297, IF: 2.4.

55.A. Davoodnia, A. Khojastehnezhad, N. Tavakoli-Hoseini. Carbon-Based Solid Acid as an Efficient and Reusable Catalyst for the Synthesis of 1,8-Dioxodecahydroacridines Under Solvent-Free Conditions. Bulletin of the Korean Chemical Society 2011, 32, 2243, IF: 0.6.

https://www.scopus.com/authid/detail.uri?authorId=35107928900

https://www.scopus.com/authid/detail.uri?authorId=56377906100